Wholesale Marine - Boating Supplies and Marine Accessories Superstore

The information provided here has been reproduced courtesy of Pettit Paint Company. Wholesale Marine reproduced this information 2/22/2008.

GENERAL DESCRIPTION
Aluma Protect Aluminum Epoxy Primer 4400/4401 is a corrosion
resistant, two component epoxy-polyamide coating for use on
sandblasted aluminum where maximum resistance to fresh or salt
water is required. The complete coating system is resistant to water,
many industrial chemical fumes, and very humid environments.
It is intended as a corrosion resistant primer coat for aluminum
pleasure craft and has excellent durability in exterior exposures,
although, like most epoxies, it will chalk if not top coated. (more…)

The information provided here has been reproduced courtesy of Pettit Paint Company. Wholesale Marine reproduced this information 2/22/2008.

GENERAL DESCRIPTION
Pettit Protect High Build Epoxy Primer 4700/4701 is a heavy-duty,
high build, two component epoxy-polyamide coating for use where
maximum resistance to fresh or salt water is required. The complete
coating system is resistant to water, many industrial chemical fumes,
and very humid environments. It is ideally suited to many commercial
and pleasure craft applications and has excellent durability in exterior
exposures, although, like most epoxies, it will chalk if not topcoated. (more…)

The information provided here has been reproduced courtesy of Pettit Paint Company. Wholesale Marine reproduced this information 2/22/2008.

GENERAL DESCRIPTION
Easypoxy is a modern polyurethane topside and deck enamel improved
by the addition of silicone for brilliant shine and easy brushability. It has
ultraviolet filters which enhance the already superior gloss retention and
durability of polyurethane. The result is a topside finish thats exceptionally
easy to apply, producing a lasting gelcoat-like brilliance with a minimum
of effort. For a semi-gloss finish for decks and interiors use 3106
Easypoxy Semi-Gloss White or simply add 9080 Easypoxy Satin Additive
to any Easypoxy color for a custom satin look.
Although not recommended for constant immersion, Easypoxy can be
used on the bottoms of dry-sailed boats that will be in water no more
than two days at a time. Allow the last coat of Easypoxy to dry a minimum
of 7 days before launching when Easypoxy is used in this manner.

(more…)

The information provided here has been reproduced courtesy of Pettit Paint Company. Wholesale Marine reproduced this information 2/22/2008.
GENERAL DESCRIPTION
Unepoxy is a hard protective antifouling paint for use on boat bottoms. It can be applied over most aged hard antifouling coatings. Old soft antifouling paints should be removed for best adhesion. It may be applied on fiberglass boats with outboards or outdrives with no danger of electrolysis, provided the drive units are not coated themselves. Unepoxy is also suitable for all non-aluminum traileredboats that are used for durations of up to two weeks in salt or fresh water before retrailering.Unepoxy Standard has excellent adhesion to fiberglass, wood and steel hulls and is perfect for both power and sail boats. Its compatibility with all properly prepared hard bottom paints permits safe overcoating without fear of lifting. (more…)

The information provided here has been reproduced courtesy of Pettit Paint Company. Wholesale Marine reproduced this information 2/22/2008.
GENERAL DESCRIPTION
Unepoxy Plus is an excellent, general purpose antifouling for boaters desiring
aggressive bottom protection in an easy to apply, cosmetically attractive
finish. Unepoxy Plus antifouling is resistant to algae, barnacles, grass, zebra
mussels, etc. Unepoxy Plus antifouling is equally effective in both fresh and
saltwater and is also ideal for trailered boats.

(more…)

The information provided here has been reproduced courtesy of Pettit Paint Company. Wholesale Marine reproduced this information 2/22/2008.
GENERAL DESCRIPTION
Trinidad SR is a hard protective paint which produces the most durable
finish for long lasting performance. The high loading of cuprous oxide combined
with a specially formulated algicide results in unprecedented resistance
to barnacles, algae, slime and other marine and fresh-water fouling
organisms. It can be applied over most hard antifouling coatings. Old soft
antifouling paints must be removed before applying Trinidad SR. Trinidad SR
has excellent adhesion to fiberglass, wood and steel hulls and is perfect for
both power and sail boats. Its compatibility with all properly prepared hard
bottom paints permits safe overcoating without fear of lifting.

(more…)

The information provided here has been reproduced courtesy of Interlux Paint Company. Wholesale Marine reproduced this information 2/22/2008.
PRODUCT DESCRIPTION
Primocon is an anticorrosive primer for underwater metal surfaces (including hulls, running gear, and the lower units of outboards and I/O). It will provide an excellent barrier to reduce pitting of the metal from galvanic corrosion. An excellent primer for antifouling paint over sanded fiberglass. Also suitable as a barrier/sealer coat over incompatible or unknown antifoulings. Primocon is also used to prevent leaching of TBT from an underlying antifouling coating.More…