These Bimini Tops are designed to mount within the confines of most wake board towers to provide shade for the driver and spotter. All tops are 48" long and approximately 16" (from mounting point) and are available in three different widths to best fit most towers. Frame is constructed from bright dip anodized aluminum tubing and uses high quality marine grade hardware. Top features UltimaTM fabric for the best performance in strength, UV stability and longevity and is available in 8 popular colors.
Choosing the correct size top: The tops will mount directly onto the tower frame at the center point, so pick the best position on the tower that will provide the best shade to the driver's seat. The tops are low profile at approximately 16" high at the maximum, so be sure that the position will keep the top high enough to clear the driver and spotter when seated. Measure across the tower at the mounting point that has been selected and choose the dimensions from the chart, noting the bimini width that matches your measured width on the tower. Check the width at the top and be sure that the angle of your tower will accommodate that dimension.