same day shipping clock icon
free shipping box icon
price tag icon

Garelick Outboard Transom Platform w/Telescoping Ladder

free shipping
SKU:
GAR-19536
Availability:
In Stock - Ships Today
Order within and your order ships today!
List Price: $386.99
Starting At: $282.49
(You save $104.50

Earn Captains Club Points Learn More

FREQUENTLY BOUGHT TOGETHER

Description

Garelick Outboard Transom Platform w/Telescoping Ladder

  • One stainless wraparound rail and one underside support rail (both 1" (3cm) diameter, Reversible)
  • Durable HDPE platform is pre-drilled for easy assembly
  • With 2 Step Telescoping Ladder. Overall: 18" Wide x 19" Deep. Height above and below platform: 11.5". 
  • Ladder: Length deployed: 23.5", Length stowed: 13.5", Width: 11.25". Platform Only: 18" Wide x 15" Deep x .75" Tall
  • Mounts at 10 degree angle on transom
  • Ladder Steps telescope down easily
  • Ladder slides up and under platform for stowage
  • Flat Poly treads for extra comfort

Mounting Instructions

HOW TO MOUNT GARELICK TRANSOM PLATFORM WITH TELESCOPING LADDER

Mounting Instructions:

  • After determining which side of the platform is most suitable for the handrail, mount it to the platform using 2 bolts through holes in platform. Secure with 2 locknuts.
  • Mount SS strut 22” by inserting bolt through hole and secure with locknut.
  • Mount SS strut 11” by inserting two bolts through holes and secure with 1 locknut.
  • Choose most suitable side of transom for mounting platform. Turn motor unit as far as possible to that side. Make a line on the transom indicating motor unit’s full extension to that side.
  • Position platform away from drawn line at desired mounting location, parallel to the water line, and mark 4 mounting holes through flattened ends of rails and/or struts onto the transom.
  • Drill four marked holes with a bit compatible with selected fasteners (fasteners not provided). Hold drill perpendicular to transom when drilling.
  • If transom is less than 2” thick, it is recommended that a backing plate be mounted on the inside of transom.
    • NOTE: The backing plate should be made of either aluminum, marine plywood or some other suitable non-compressive material.
  • Coat the mounting surfaces of the rails and/or struts with a marine grade adhesive/caulking compound; squeeze a small amount into mounting holes in transom. Insert selected bolts through holes and secure in position with suitable fasteners.

Maintenance:

  • Periodically check mounting hardware and re-tighten (due to normal boat operation).
  • Regular fresh water rinsing and periodic cleaning with a mild abrasive cleaner will help retain luster and help prevent corrosion.

Information sourced from Garelick Assembly Instructions for Platforms Technical Data 

pdficon.pngInstallation Instructions

pdficon.pngRetaining Strap Installation Instructions

California Residents: warning sign WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov

Warranty Information

Limited Lifetime Warranty

PRODUCT REVIEWS

QUESTIONS & ANSWERS

Other Details

Google Product Type:
Boat & Dock Ladders
Wiser:
Yes
Product MPN:
19536
Product UPC:
038203195360