Welcome to WholesaleMarine.com

CALL TOLL-FREE
M-F 9:00 AM - 6:00 PM EST
1-877-388-2628
My Cart (0)

Free Shipping Promo

Keel Guard Self Adhesive Polymer Keelguard 8' Long

SKU # MKI-102B8.1

Be the first to review this product

Availability: In Stock - Ships Today
X

* Required Fields

$200.34

Our Price $158.95

* Required Fields

SKU# MKI-102B8.1

Description

Protect your boats hull from scuffs and scrapes with this brand new 5' wide keel guard. The KeelGuard is a composite Polycor PVC based extrusion with special plasticizers and UV inhibitors. This material has been tested by independent laboratories and 3M

  • Protect against abrasive sand, rocks, concrete ramps and oyster beds
  • Eliminate costly repairs
  • Enjoy the highest quality and superior engineering
  • Increase the value of your boat

Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates.

The Megaware KeelGuard® is a very simple product to install; however, the following instructions must be strictly followed. Any short cuts or missed steps will jeopardize and compromise the full bonding capabilities of the 3M® adhesive. For best results the KeelGuard should be installed at an ambient temperature of 60º or above. Typically, the Megaware KeelGuard® is mounted 4 to 6 inches above the waterline on the bow, ending 2 to 3 feet or more beyond the lowest point of the Keel. If protection is required above the Boweye, a separate Bow Guard is available in 1ft to 3ft lengths. For watercraft*, begin the KeelGuard approximately 1 inch below the bow hook, running the length of the keel, and ending 4 to 6 inches forward of the pump intake.

KeelGuard Size Boat Length
4 ft up to 14 ft
5 ft up to 16 ft
6 ft up to 18 ft
7 ft up to 20 ft
8 ft up to 22 ft
9 ft up to 24 ft
10 ft up to 26 ft
11 ft up to 28 ft
12 ft up to 30 ft
Specifications
Manufacturer Keel Guard
Manufacture Part Number 102B8.1
Related Products