Garelick 3-Step Transom Ladder

HOW TO MOUNT GARELICK 3 STEP TRANSOM LADDER

Mounting Instructions:

• Choose the most suitable side of transom for mounting ladder.
• Locate a place on the transom where all four tube ends of ladder make contact with boat and will not interfere with turning operation of motor unit.
  • NOTE: Ensure that prior to mounting the ladder that there are NO electrical wires, hydraulic hoses, water hoses or steering cables in the selected mounting location.
• Place ladder so that when folded down, bottom step should ideally be in water.
  • Keep step surface parallel to water
  • Keep ladder perpendicular to centerline of boat. IF necessary to modify ladder, cut with a metal hacksaw, keeping steps parallel to the water. Re-drill ¼” holes.
• Mark tube end location at point of contact with transom and attach mounting brackets with appropriate fasteners.
• Attach mounting brackets to boat transom and secure the ladder in place by tightening all hardware and ensuring smooth operation.

Information sourced from Garelick Mounting Instructions for 18019 1-3 Step Transom Ladder 

Installation Instructions