Garelick Folding Pontoon Deck Ladder

HOW TO ASSEMBLE GARELICK FOLDING PONTOON DECK LADDER

Assembly Instructions:

• This ladder is designed to be mounted on the pontoon at the side gate.
• Fold out hooks. Slip ladder catches onto ends of both ladder hooks.
• Position and mark four mounting holes on deck surface.
  • NOTE: Make certain ladder standoffs are at or below the centerline of the pontoon floats.
• Drill 8 marked holes with 1/8” diameter drill bit. Secure the ladder catch using the included screws.
  • NOTE: The rubber gasket must be inside catch for proper operation. Larger opening in catch must face away from the ladder and into the deck area.
• Attach ladder to deck by inserting hooks into large opening in catch slot. Slide latch bolts down into slot.
• Make certain ladder hands perpendicular to water surface. Ladder standoffs can be cut as necessary.
• To cut standoffs, remove the rubber tips, cut to desired length, and reinstall tips.
• Rubber tipped standoffs on ladder are intended to abut the pontoon float and cushion the ladder.

To remove ladder, slide up and then pull out of catches.

Maintenance:

• Periodically check mounting hardware and re-tighten (due to normal boat operation).
• Regular fresh water rinsing and periodic cleaning with a mild abrasive cleaner will help retain luster and help prevent corrosion.

Safety:

• This ladder is designed for boat use only
• Never operate your boat with the ladder in positon. Serious injury or damage to your boat or ladder may result.

Information sourced from Garelick Pontoon Ladders Product Technical Information.