Welcome to WholesaleMarine.com

Call Toll-Free: M-F 9AM - 6PM EST
1-877-388-2628

Interlux Fiberglass Bottomkote Racing Bronze

SKU: ILX-999
Availability: In Stock - Ships Today
Shipping Restrictions: Ground Only To Contiguous 48 States
Order within and your order ships today! Details

Availability: In stock

$221.86

Our Price $119.81

Interlux Paint
Recent Customer Feedback
 

Description

Interlux Fiberglass Bottomkote Racing Bronze

Fiberglass Bottomkote Racing Bronze provides season long protection against fouling organisms. Fiberglass Bottomkote Racing Bronze uses an acrylic resin to provide ease of application, and a hard, smooth, racing finish, that is compatible with most other types of antifouling paints.

  • Can be hauled out and trailered, on a short term basis, without loss of antifouling capability
  • Can be wet-sanded and burnished to provide an even smoother surface for racing boats
  • For use on fiberglass, wood and primed underwater metals (except aluminum)
  • Effective in fresh and low fouling salt water against barnacles and zebra mussels
  • Sold in Gallons

Specifications:

  • Finish: Low Sheen
  • Application Area: Below the waterline
  • Number of Coats: 2-4
  • Coverage (approx): 300 ft²/gal by brush
  • Applicaton Methods: Brush, roller, spray

Associated Products:

Interlux Special Thinner: For thinning on bare wood & clean-up

Interlux Fiberglass Solvent Wash: For cleaning on fiberglass

 

***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***

Product Specifications

Manufacturer Interlux Paint
Manufacture Part Number 999
UPC 081948109994
ASIN B001HX8S3U
Number of Seasons Single Season
Hull Material Fiberglass, Steel, Wood
Is Boat Trailerable Trailerable

How to Apply

HOW TO APPLY INTERLUX FIBERGLASS BOTTOMKOTE RACING BRONZE

 

APPLICATION: Brush, Roller, Conventional Spray – Pressure Pot or Siphon Cup

NUMBER OF COATS:  2 (For Bare Wood, use 3, with the first coat thinned)

** Under good drying conditions, Bottomkote Racing Bronze may be over coated after 2 hours, however it is best to allow an overnight dry to ensure complete solvent evaporation.

THINNER: For Bare Wood – Special Thinner 216

COVERAGE: (Theoretical) 300/ gallon by brush

DRY TIMES:
 Temp Touch Dry  Immersion 
 50°F  1 HR 16 HR 
 59°F 45 Mins  8 HR
 73°F 30 Mins  6 HR 
95°F 20 Mins  4 HR

Note: Maximum Immersion Times are as follows: 50-95°F : 60 days

OVERCOAT TIMES:

 Temperature

 Minimum Hours Before Applying Overcoat
 50°F  4 Hours
 59°F  2 Hours
 73°F 2 Hours 
 95°F 2 Hours 


PREPARATION PROCEDURES:

Previously Painted Surfaces

  • In good condition, remove loose paint by sanding with 80 grade (grit) paper, then wipe with Special Thinner 216.
  • In poor condition, remove antifouling paint in poor condition with Interstrip Semi-Paste 299E.

Bare Fiberglass

  • Begin by scrubbing well using soap and water and a stiff brush.
  • Rinse with fresh water and allow to dry. Wipe a small are with a clean rag that has been wetted with Fiberglass Solvent Wash 202.
  • While the surface is still wet, wipe with a clean, dry rag. Continue this process until the entire surface has been cleaned.
  • Sand with 80 grade (grit) paper. Remove sanding residue and wipe with Fiberglass Solvent Wash 202.

Bare Wood

  • Sand with 80 grade (grit) paper and clean with Special Thinner 216.
  • Apply first coat reduced 10% with Special Thinner 216.
  • If necessary, fill seams with Seam Compound Brown 30.

Do not apply Bottomkote Racing Bronze over aluminum

 

APPLICATION:

  • At least 2 coats should be applied. 3 coats if applying to bare wood, with the first coat being thinned.
  • Interlux Fiberglass Bottomkote Racing Bronze can be applied by brush, roller, or conventional spray – pressure pot or siphon cup.

Conventional Spray Specifications

Pressure Pot

  • Pressure – 4.08-4.76 bar/60-70 psi (gun pressure) | 10-15 psi (pot pressure).
  • Tip Size - 1.8-2.2 mm/70-85 thou.

Siphon Cup

  • Pressure - 3.44-4.47 bar/50-65 psi (gun pressure)
  • Tip Size – 1.5-1.8mm/60-70 thou

Note: Spraying of antifouling paints is prohibited in Canada.

 

Information sourced from the Interlux Fiberglass Bottomkote Racing Bronze Application Guide.  

Reviews

Write Your Own Review

You're reviewing: Interlux Fiberglass Bottomkote Racing Bronze

  •  
    1 star
    2 stars
    3 stars
    4 stars
    5 stars
    Price
    Value
    Quality

* Required Fields

You May Also Like