Welcome to WholesaleMarine.com

Call Toll-Free: M-F 9AM - 6PM EST

Pettit Easypoxy High Gloss Topside Marine Paint

SKU: PET-3106Q.1
Availability: In Stock - Ships Today
Shipping Restrictions: Ground Only To Contiguous 48 States
Order within and your order ships today! Details

Availability: In stock

Starting At:

Starting At $33.17


* Required Fields

* Required Fields

Pettit Paint
Recent Customer Feedback


SKUContainer SizePaint ColorRetail PriceOur PriceSavings 
PET-3106GGallonSemi Gloss White$153.12$85.75You Save 44%
PET-3106QQuartSemi Gloss White$55.61$33.36You Save 40%
PET-3108GGallonOff White$160.09$88.05You Save 45%
PET-3108QQuartOff White$55.61$33.36You Save 40%
PET-3175GGallonWhite$148.48$92.06You Save 38%
PET-3175QQuartWhite$55.61$35.03You Save 37%
PET-3213QQuartBlue Ice$55.61$35.03You Save 37%
PET-3229QQuartBikini Blue$55.61$35.03You Save 37%
PET-3237QQuartElectric Blue$57.93$36.50You Save 37%
PET-3248QQuartOcean Blue$57.93$36.49You Save 37%
PET-3348QQuartJade Green$55.61$35.03You Save 37%
PET-3350QQuartKelly Green$55.61$35.03You Save 37%
PET-3518QQuartSandstone$57.93$36.50You Save 37%
PET-3624QQuartBright Red$60.25$37.96You Save 37%
PET-3626QQuartBurgundy$60.25$37.96You Save 37%
PET-3711QQuartPlatinum$57.93$36.50You Save 37%
PET-3801QQuartBlack$55.61$35.03You Save 37%
PET-3208QQuartHatteras Cream$52.65$33.17You Save 37%
PET-3333QQuartSeafoam Green$55.61$33.36You Save 40%
PET-3456QQuartFighting Lady Yellow$57.05$35.94You Save 37%
PET-3715QQuartSeattle Gray$54.85$34.55You Save 37%
PET-3720QQuartSteel Gray$57.93$36.50You Save 37%

Pettit Easypoxy (EZ-Poxy) High Gloss Topside Marine Paint

Pettit Easypoxy is a modern Polyurethane Paint for that is easy to apply with a long lasting one part application, long lasting, and provides fantastic gloss retention. Pettit EZ-Poxy is for topside and deck applications as it features a brilliant shine and user friendly brush-ability due to the addition of silicone. Pettit EZ-Poxy features a topside finish that’s exceptionally easy to apply, as it produces a gelcoat-like brilliance with minimum effort. Easypoxy also features advanced ultraviolet filters that enhance its superior gloss retention and durability. EZ-Poxy is economical, forgiving, and requires less effort. Eeasypoxy is available in white and twenty-five popular topside colors. Easypoxy provides exception finish for novice or expert painters with reccomended roll and tip method. 

  • Highest Gloss Topside Enamel
  • Tough, Weather Resistant Finish
  • Easy to Apply, Excellent Brushability
  • Fortified with advanced ultraviolet filters
  • Finish: High-gloss
  • Coverage: 600 sq. ft/gal.
  • Number of Coats: 2 minimum

Suggested Primer: Pettit EZ-Prime

Pettit EZ-Prime should be used as a base coat whenever the surface to be painted is aged, cracked, checked, pitted or in any way less than smooth. It can be applied to fiberglass, wood and previously painted surfaces. Dries quickly and is easy to sand. Also known as Pettit Easypoxy Undercoater before renamed to EZ-Prime.

Associated Products:

Pettit 120 Thinner: Use for brushing, rolling and clean-up.

Pettit 121 Thinner: Use for spraying.

Pettit Satin Additive: Will produce a semi-gloss to semi-flat finish often desired for non-glare deck surfaces and interiors. 


Product Specifications

Manufacturer Pettit Paint
Manufacture Part Number 3106g, 3106Q, 3108G, 3108Q, 3175G, 3175Q, 3213Q, 3510Q, 3518Q, 3624Q, 3229Q, 3237Q, 3248Q, 3348Q, 3350Q, 3415Q, 3626Q, 3711Q, 3801Q, 3208Q, 3333Q, 3720Q, 3456Q, 3715Q
UPC 725469004115, 725469004122, 725469004160, 725469004177, 725469004436, 725469004443, 725469004481, 725469008724, 725469008724, 725469005679, 725469004665, 725469004719, 725469004757, 725469008663, 725469005082, 725469008694, 725469008816, 725469005792, 725

How To Apply

How to Apply Pettit Easypoxy Topside Paint

APPLICATION DATA METHOD: Brush, roller, or spray


DRY FILM THICKNESS PER COAT: 1.5 mils (3 wet mils)

COVERAGE: 600 sq. ft/gal.

APPLICATION TEMP: 50°F Min. / 90°F Max.

THINNER: 120 Brushing, 121 Spraying

Temp To Recoat To Launch
90°F 2 HR 8 HR
70°F 3 HR 16 HR
50°F 6 HR 24 HR

PREVIOUSLY PAINTED SURFACES: Clean painted areas by washing with a solution of two cups household ammonia per gallon of water and rinse well. Remove existing mildew with household bleach instead of ammonia. Never mix bleach and ammonia. If the old paint is an oil-based enamel or polyurethane, and is in good, sound condition, sand it thoroughly smooth with 150 grit sandpaper, solvent clean to remove residue with Pettit 120 Thinner, then proceed with the first coat of Easypoxy. If the old oil-base or polyurethane paint contained a non-skid material, scrub the non-skid service with Pettit # 92 Bio-Blue Hull Surface Prep using a stiff bristle brush. Thoroughly rinse the surface and allow to dry, then apply two coats of Easypoxy. If the old paint is a latex or water-based paint, or is in poor condition, remove it with a paint and varnish remover or by sanding. Proceed with instructions for the appropriate bare surface system.

BARE FIBERGLASS: The entire surface to be painted regardless of age must be thoroughly washed with 120 thinner or 92 Bio-Blue to remove all traces of mold release agents and wax. Sand the gel coat with 80 to 120 grit sandpaper to a dull, frosty appearance, solvent clean with Pettit 120 Thinner to remove residue. If the surface is in excellent condition, proceed with the first finish coat of Easypoxy. If the surface is rough or imperfections exist, it will have to be repaired. Fill all nicks and gouges with 7050 EZ-Fair Epoxy Fairing Compound; sand flush when hard, then solvent clean. Follow with a coat of 6149 EZ Prime to smooth the surface and provide a uniform base; sand well and solvent clean. Proceed with the first finish coat of Easypoxy.

BARE WOOD: Sand surface smooth with 80-120 grit sandpaper, then solvent clean with Pettit 120 Thinner to remove residue. Fill all screw heads or small holes with 7050 EZ-Fair Epoxy Fairing Compound; sand flush and solvent clean with Pettit 120 Thinner. Apply a coat of 2018 EZ WoodSealer to penetrate and seal the porous grain. Follow with one or two coats of 6149 EZ Prime until an evenly smooth base condition is reached; sand each coat with 80-120 grit sandpaper and solvent clean with Pettit 120 Thinner. Proceed with the first finish coat of Easypoxy. Bare wood that has been epoxied must be thoroughly scrubbed with an ammonia/water solution then sanded with 120 grit sandpaper and solvent cleaned with Pettit 120 Thinner. Follow with a coat of 6149 EZ Prime to smooth the surface and provide a uniform base. Sand well and solvent clean with Pettit 120 Thinner, then proceed with the first coat of Easypoxy

STEEL HULLS: Surface must be cleaned to a bright finish by sandblasting or grinding; remove blast residue. Immediately apply one coat of 6980 Rustlok Primer; allow to dry until tacky. If surface is rough, apply a coat of 6627 Tie-Coat Primer; sand well and solvent clean with Pettit 120 Thinner. Repeat application as needed until a smooth, uniform base is reached. Proceed with the first coat of Easypoxy.

ALUMINUM: Wipe the surface free of oil and grease with Pettit 120 Thinner. Remove oxidation and etch the surface with medium grit emery cloth; remove sanding residue. Apply one thin “wet” coat of 6455/044 Metal Primer; allow to dry at least two hours. Proceed with the first coat of Easypoxy. 6149 EZ Prime can be used over the 6455/044 Metal Primer for smoothing surfaces if desired.

APPLICATION INFORMATION: Stir thoroughly before use. Easypoxy may be applied by brush, roller, conventional or airless spray. For brush or roller application apply without thinning although in hot weather 5-10% Pettit 120 Brushing Thinner may be added to maintain a wet edge. For best results on large, smooth surfaces roll out using a short nap roller followed immediately by leveling off with the tip of a brush. For conventional spray application thin 15-20% with Pettit 121 Spraying Thinner. Apply one, thin even coat per day. After an overnight dry, lightly sand with 220 grit sandpaper and apply a second coat. Applying two or more coats in one day or applying excessively heavy films (greater than 4 wet mils) will lead to insufficient through drying of the paint and will yield soft paint films. For airless spray application thin up to 5% with Pettit 121 Spraying Thinner. Utilize a .011-.015 inch diameter tip for application. Do not apply Easypoxy on extremely humid days (90°+ RH) or when rain is threatening. Do not apply in the late afternoon when working outdoors as the wet fi lm may be adversely affected by dew. When working in cooler temperatures be sure the air and surface temperatures will remain at or above 50°F for at least 8 hours after application.


Applying Topside Finishes - Pettit Technical Bulletin


Write Your Own Review

You're reviewing: Pettit Easypoxy High Gloss Topside Marine Paint

    1 star
    2 stars
    3 stars
    4 stars
    5 stars

* Required Fields

You May Also Like