|SKU||Cable Length||Retail Price||Our Price||Savings|
|tel-SSC6210||10'||$140.88||$109.04||You Save 23%|
|tel-SSC6211||11'||$140.88||$109.04||You Save 23%|
|tel-SSC6212||12'||$160.31||$97.79||You Save 39%|
|tel-SSC6213||13'||$160.31||$97.79||You Save 39%|
|tel-SSC6214||14'||$160.31||$97.79||You Save 39%|
|tel-SSC6215||15'||$160.31||$97.79||You Save 39%|
|tel-SSC6216||16'||$160.31||$97.79||You Save 39%|
|tel-SSC6217||17'||$160.31||$97.79||You Save 39%|
Teleflex QC II Replacement Steering Cable Assemblies are a direct Replacement for Teleflex SSC62 (used in Safe-T QC & NFB Systems) and SSC72 (used in Safe-T TS & Big-T Systems) and fit most Teleflex rotary helms made after 1968. The QC II features the patented Quick Connect cable hook-ups. These cables can be used on boats with inboards, outboards & stern drives, with single or twin motors.
- Fast, easy installation: uses simple snap-in connection, Teleflex Quick Connect (QC) cable and industry standard Safe-T mount ing hardware
How to Measure Steering Cables “Measure Twice. Order Once.”
Replacement of Existing Cable: If possible, find the part number stamped on the plastic jacket of the old cable. If you removed the old cable, measure for the replacement cable as follows:
For Rotary Steering Cable Replacement, Measure Existing Cable as follows: Measure plastic cable jacket (“Y” dimension, shown in above drawing) in inches, add 18″, and round up to next foot. Order that length cable.
New Installation: Measure cable routing path from wheel center line to engine connection, as follows: A = Center line of wheel to gunwale (or deck, if routed downward), B = Dash to transom, C = Gunwale to centerline of cable connection at centered tiller.
For Cable Installations through the Engine Tilt Tube: Add A, B & C + 6″, then round up to the next foot. Order that length cable.
For Cables Mounted to Transom, Splashwell or Stringer: Add A, B & C, then subtract 6″ and round up to the next foot. Order that length cable.
TYPICAL SINGLE STATION ROUTING
A single-cable, starboard drive push-pull mechanical cable system is shown in this diagram. If your mechanical system is different than the one depicted and/or you have any questions about mechanical steering after reviewing this guide, please contact Teleflex (Mechanical) Technical Service at (610)-495-7011 or www.teleflexmarine.com
Cable routings (such as those found on pontoon boats) may vary from this drawing. Confirm length by laying a garden hose or similar object) along cable path and measure run from wheel to engine connection point.