|SKU||Cable Length||Retail Price||Our Price||Savings|
|tel-SS15712||12'||$782.60||$280.96||You Save 64%|
|tel-SS15713||13'||$788.85||$283.20||You Save 64%|
|tel-SS15714||14'||$795.06||$285.43||You Save 64%|
|tel-SS15715||15'||$801.32||$287.68||You Save 64%|
|tel-SS15716||16'||$807.57||$289.92||You Save 64%|
|tel-SS15717||17'||$813.82||$292.17||You Save 64%|
|tel-SS15718||18'||$820.03||$294.40||You Save 64%|
|tel-SS15719||19'||$826.28||$296.64||You Save 64%|
|tel-SS15720||20'||$832.54||$298.89||You Save 64%|
|tel-SS15721||21'||$802.34||$305.68||You Save 62%|
|tel-SS15722||22'||$845.04||$321.96||You Save 62%|
Patented No FeedBack Control — PLUS THE WORLD’S MOST POPULAR TILT STEERING! You get Tilt Steering, the advantage of 4.2 turns lock-to-lock and Teleflex's patented No FeedBack steering to lock out steering loads! Teleflex’s 4.2 Rotary NFB Tilt Kit puts all the latest mechanical steering technology in one box!
NFB 4.2 Tilt single-cable systems are suitable for most single-station boats with a single non-power-assisted outboard or stern drive engines up to V-6 and minimal engine flutter or steering instability. 4.2 Tilt accepts steering wheels up to 16” diameter.
Drop-in replacement for all current generation Teleflex Tilt Steering with no dash modification — and replaces other rotary steering systems with minimal dash modifications.
- Tilt Steering with 48° of total adjustment in five 12° positions.
- Patented NFB (No FeedBack™).
- Comfortable 4.2 turns from lock-to-lock.
- Minimal clutch free play.
- Standard 3/4” round tapered steering wheel shaft.
- Stainless steel cable output ends.
- Fast, easy installation: uses Teleflex Quick Connect (QC) steering cable.
- Meets A.B.Y.C. standards.
- Meets N.M.M.A. certification requirements.
How to Measure Steering Cables “Measure Twice. Order Once.”
Replacement of Existing Cable: If possible, find the part number stamped on the plastic jacket of the old cable. If you removed the old cable, measure for the replacement cable as follows:
For Rotary Steering Cable Replacement, Measure Existing Cable as follows: Measure plastic cable jacket (“Y” dimension, shown in above drawing) in inches, add 18″, and round up to next foot. Order that length cable.
New Installation: Measure cable routing path from wheel center line to engine connection, as follows: A = Center line of wheel to gunwale (or deck, if routed downward), B = Dash to transom, C = Gunwale to centerline of cable connection at centered tiller.
For Cable Installations through the Engine Tilt Tube: Add A, B & C + 6″, then round up to the next foot. Order that length cable.
For Cables Mounted to Transom, Splashwell or Stringer: Add A, B & C, then subtract 6″ and round up to the next foot. Order that length cable.
TYPICAL SINGLE STATION ROUTING
A single-cable, starboard drive push-pull mechanical cable system is shown in this diagram. If your mechanical system is different than the one depicted and/or you have any questions about mechanical steering after reviewing this guide, please contact Teleflex (Mechanical) Technical Service at (610)-495-7011 or www.teleflexmarine.com
Cable routings (such as those found on pontoon boats) may vary from this drawing. Confirm length by laying a garden hose or similar object) along cable path and measure run from wheel to engine connection point.