Notes on installing/wiring your Aerial Light Bar: Every boat is different and you may need to improvise to accommodate your needs. This diagram is merely a guideline and a professional marine specialist should be consulted if at anytime you need assistance. We recommend using an Aerial wiring harness available at www.aerialwakeboarding.com. Your Aerial Light Bar was designed to house your wires (in the cross bar) for a professional and watertight appearance. All exposed wires should be wrapped with electrical tape. We recommend attaching your light bar to one of our Aerial Towers which also houses your light and speaker wires in the legs. The Aerial Speaker Lightbar Combo can be assembled in 3 easy steps. AERIAL PRODUCT CARE Wash all racks with a mild soap and water. Polished Product - use Mothers Mag & Aluminum Polish which can be found at any auto parts store Powder Coated Products- no wax, or cleaners can be used Check set screws before each use Check Allen Bolts before each use The information provided here has been reproduced courtesy of Aerial Wakeboard Products. Wholesale Marine reproduced this information 07/15/2009. #Audio #DIY
