Fulton Standard Trailer Hitch Ball - 3/4" Shank

Fulton Standard Trailer Hitch Ball w/ Chrome Finish - 3/4" Shank

Fulton standard hitch balls are manufactured to be durable, strong, and good looking. These hitch balls are made of solid steel and are cold forged for superior strength. The chrome finish not only looks great, but it also provides lasting protection against corrosion. Fulton hitch balls are engineered to meet all safety requirements of SAE J684 and are backed by a limited lifetime warranty.

Features:

• 3,500 lbs. Capacity, 2" Ball Diameter
• Meets all safety requirements of SAE J684
• Forged for superior strength
• Solid steel construction
• Chrome finish for corrosion prevention
• Limited lifetime warranty

When installing hitch balls, torque all 3/4" shank diameter balls to 160 ft. lbs.

Specifications:

How to Select the Right Hitch Ball

Information sourced directly from the manufacturer. 

• Always use the properly-rated hitch ball for your towing system
• Your towing system's maximum weight rating is always equal to the lowest rated item in the system
• Your hitching system cannot be upgrades to a rating higher than the maximum rating of your hitch

For example, a 3,500 lbs. ball on a 2,000 lbs. max trailer weight-rated hitch does not increase your towing capacity to 3,500 lbs. Your hitching system is still rated at 2,000 lbs. Conversely, a 2,000 lbs. ball on a 3,500 lbs. max trailer weight-rated hitch decreases your maximum towing capacity to 2,000 lbs.

• The hitch ball diameter must be the same diameter as the trailer coupler (1-7/8", 2", or 2-5/16")
• The shank diameter of the hitch ball should be the same as the hole diameter in the ball mount.
• The shank length should be long enough to allow at least two threads to be visible when the hitch ball is installed and the nut is completely tightened.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov