Total Price:
Add to CartSold in Gallons
ProGuard is performance, value and reliability all in one. ProGuard is a hard modified epoxy, low V.O.C., high copper antifouling paint formulated to effectively provided year round protection in warm waters or where fouling is at its worst. ProGuard can be applied directly over most properly prepared antifouling paints. Recommended for use on the underwater areas of fiberglass, wood, and properly primed metal (except aluminum) boat hulls and can be used in fresh, salt and brackish waters.
Specifications:
Colors Available:
Do not use on aluminum.
***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***
APPLICATION DATA METHOD: Airless Spray, Brush, Conventional Spray, Roller
NUMBER OF COATS: 2, 3 on bare wood
DRY FILM THICKNESS PER COAT: 2 mils (3.5 mils wet)
COVERAGE: 470 sq. ft/gal.
APPLICATION TEMP: 50°F Min. / 95°F Max.
THINNER: Special Thinner 216
| Temp | To Touch | To Recoat | To Launch |
| 95°F | 30 MIN | 1 HR | 6 HR |
| 73°F | 1 HR | 2 HR | 8 HR |
| 50°F | 2 HR | 6 HR | 12 HR |
PREVIOUSLY PAINTED SURFACES - GOOD CONDITION: Remove all traces of loose paint by sanding the entire surface with 80 grit wet-or-dry sandpaper; wipe surface clean with Xylene¹ using the two-rag method before and after sanding. Apply two coats of Super ProGuard allowing for appropriate dry times.
BARE FIBERGLASS: Scrub the surface thoroughly with a stiff brush using soap and water. Flush with fresh water to remove the soap residue and allow surface to dry. Remove mold release wax and surface contamination by wiping down the surface with Xylene¹ using the two-rag method. Fill any surface imperfections with approved filler for underwater use. Sand the entire surface with 80-grit sandpaper until a flat matte finish is obtained. Wipe the sanding residue off the surface with Xylene¹ using the two-rag method. Apply two coats of Super ProGuard allowing for appropriate dry times.
BARE WOOD: Sand the entire surface with 80 grit wet-or-dry sandpaper; wipe surface clean with Xylene¹ using the two-rag method before and after sanding. Apply the first coat of Super Proguard thinned 10% with Xylene². Apply two finish coats of Super Proguard allowing for appropriate dry times.
APPLICATION METHODS:
California Residents: 
WARNING
Cancer and Reproductive Harm -
P65Warnings.ca.gov
Other Details
Interlux VC Offshore Antifouling Boat Bottom Paint Sold in Gallons VC Offshore for racing, sailing and performance power boats is formulated with Fluoro microadditive for a hard, smooth low...
Choose Options
Interlux Micron CSC Antifouling Bottom Paint Interlux Micron CSC is a premium ablative bottom paint engineered for superior protection against marine growth.
Choose Options
Interlux Pacifica Plus Antifouling Marine Paint with Biolux Interlux Pacifica antifouling paint is specially designed to battle slime and contains Econea to help ward off barnacles, algae, and other...
Choose Options
Interlux ACT Ablative Antifouling Bottom Paint Interlux ACT Antifouling Paint Ablative provides excellent season-to-season protection. Its formula includes Interlux’ Ablative Technology to remove...
Choose Options
Interlux Micron Extra SPC Antifouling Paint Interlux is known for its high-quality antifouling paints that have been manufactured using only superior ingredients and developed for long-lasting...
Choose Options
Interlux Aqua One Ablative Antifouling Paint Interlux is a leading manufacturer of antifouling paint and has been protecting boats with their complete line of protective paints for over a century...
Choose Options
