Categories

Site Information

 Loading... Please wait...
Need Help? Call Toll Free: 877-388-2628
  • Same Day Shipping
  • Free Shipping
  • Low Price Guarantee

T-Top Boat Covers

Cover Selection Guide Find the boat cover that fits

Clear
  • 1) Boat style:
  • 2) Boat length:
  • 3) Maximum Beam:
  • Drive type:

Cover Selection Guide Find the boat cover that fits

Clear
  • 1) Manufacturer:
  • 2) Model:
  • 3) Year:

Custom Fit T-Top Boat Covers

Keep your center console boat clean and protected with a Custom Fit T-Top Boat Cover from Wholesale Marine. We carry a wide variety of T-Top Boat Covers available in three fabrics and multiple colors. These durable covers are designed for your specific boat model, delivering full coverage and protection. T-Top Covers attach under your T-Top to keep moisture from forming on your boat. All T-Top Boat Covers from Taylor Made are custom made in the USA. 

Our T-Top Boat Cover Selection Guide is available to help you search by your boat’s model and year to easily view and compare available T-Top Covers. If you’re having trouble finding your boat, or can’t decide which fabric will meet your needs, our boating enthusiasts are here for you! Give us a call Monday-Friday from 9AM – 6PM at 1-877-388-2628 and we will be more than happy to help.

How to Install Your T-Top Boat Cover

Step 1:

Unzip both sides of the boat cover and unbuckle all side release buckles to separate the cover into two pieces.

Locate the bow section of the cover. (It will have a sewn-in bow/front ticket). With the cover’s good side up, place the bow section of the cover over the bow of the boat and pull the cover back to the T-Top.

Take the stern section of the cover and place it over the stern corners of the boat. Pull the stern section up until it meets the bow section of the cover at mid-console.

Step 2:

While standing on top deck, locate the sewn-in loops on the right and left side of the zipper. Use one length of rope and thread it through the loops. Use a basic over-hand knot to secure the cover to the top of the T-Top frame.

Step 3:

While standing on top deck, locate the two side release buckles at the top of the console tube. The buckles are sewn to the bad side of the material on the bow section side of the cover (just below the weather flap). The side release buckles will correspond with (2) straps sewn to the outside of the cover on the opposite side. These straps will support your cover by going over the hand rail or windscreen like suspenders.

Thread the straps through the buckles and pull the straps tightly.

Step 4:

On the stern section of the console tube, locate the strap and release buckle sewn horizontally to the good side of the cover. Thread the webbing through the side release buckle and draw the webbing to the desired tension.

Step 5:

Once the console tube is in place and secured, locate the weather flap on the front section of the console tube. Pull the flap over the open section between the t-top and secure it using the two side release buckles sewn into the flap and the two straps sewn into the cover. Thread the straps through the knuckles and pull the straps downward.

Step 6:

Starting at the top of the consoles tube, zip one side of the boat cover together. Secure non-adjustable side release buckles at the top and bottom of the zipper.

Step 7:

Secure the rope lock. Remove any excess slack but do not tighten the cover fully yet. Go to the other side of the boat and repeat steps 2, 5, 6, and 7 to complete the installation of the cover.

Step 8:

Use the rope lock and pull the rope tight around the boat body. Tighten the rope on both sides.

Information from Taylor Made's T-Top Boat Cover Installation Guide. Click here to Download

  • Same Day Shipping
  • Free Shipping
  • Low Price Guarantee