Davis Air-Dryr Marine Dehumidifier

Davis Air-Dryr Marine Dehumidifier

The Davis Air-Dryr Marine Dehumidifier is a reliable solution for preventing moisture damage in your boat's enclosed spaces. Available in two sizes, this compact unit handles up to 1000 cubic feet (#1458) or 500 cubic feet (#1459) of space. The beige polycarbonate housing is both durable and safe to touch, while the slim, stable design prevents tipping. Operating silently via natural convection, it requires no fan, switch, or thermostat, making it ideal for boat cabins, bilges, and engine rooms. Simply place it on the floor and plug it into a standard 110-volt outlet for continuous 24-hour operation. The Air-Dryr works by heating damp air above the dew point, releasing moisture through top vents while drawing in cooler air from below. With low maintenance requirements and operating costs comparable to a light bulb, this UL-listed dehumidifier includes safety features like thermal cutoff protection and comes with a one-year manufacturer's warranty.

Features:

• Strong and durable, beige polycarbonate housing
• Slim and stable design will not tip over easily
• Small in design, will fit into confined spaces with ease
• Handles high air volume for fast drying
• Designed to run 24 hours a day
• Safe to the touch
• Low operating cost
• Low maintenance
• No switch, fan, or thermostat; uses natural convection to circulate the air
• Silent operation
• No components to cause sparking
• UL listed
• One-year manufacturer's warranty.

Marine Dehumidifier Specifications:

• #1458
• Handles up to 1000 cubic feet
• Draws 1.1 Amps, 130 Watts
• 13.5" Diameter
• 4.25" Height
• #1459
• Handles up to 500 cubic feet
• Draws 0.6 Amps, 70 Watts
• Dimensions: 14" x 5" x 4.5"

How to Use the Davis Air-Dryr Marine Dehumidifier

To achieve optimal efficiency, always operate the Air-Dryr Marine Dehumidifier in the normal upright position.

• Place Air-Dryr on the floor in the area to be served.
• Plug the power cord into any standard 110-volt grounded outlet.
• When a unit is placed on a high pile carpet, airflow through the bottom intake holes may be restricted.
• Note: for this reason, steps should be taken to maintain a clear air space beneath the unit.
• After you plug in the unit, allow 15 to 20 minutes for it to heat to the proper operating temperature.
• Exterior surfaces may be cleaned with a mild detergent and water solution on a moist cloth when not plugged in and have been allowed to cool.

Click to Download Davis Air-Dryr Instruction Sheet

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov