Interlux Interstrip utilizes a new technology that delivers an effective paint remove system that does not require methylene chloride, a suspected human carcinogen. Interstrip is safe for fiberglass and has a low odor.
***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***
PREPARATION: Protect floor or work area with a plastic tarp to catch run-off.
METHOD: With a natural bristle brush, apply a liberal coat of Interstrip Semi-Paste over paint in an area no larger than 10 square feet at one time. Allow the Interstrip Semi-Paste to stand until all layers of existing paint are penetrated. This will vary from as little as 15 minutes for one layer to as long as 2 hours for several coats depending on temperature. Begin scraping. If the paint does not come off easily, reapply and increase the waiting time. After the surface is thoroughly scraped clean, apply Interstrip Liquid Stripper 399 to remove any residual paint or wipe the surface with a rag or pad soaked with Fiberglass Solvent Wash 202.
HINTS: Ventilation and Humidity Control Apply in a well ventilated area. Brush Use a natural bristle brush. Other Enamels removed from fiberglass will reveal gelcoat that has not been exposed to the same level of UV light as the surrounding area. Color variations in the gelcoat are likely.
California Residents: 
WARNING
Cancer and Reproductive Harm -
P65Warnings.ca.gov
Other Details
Interlux Toplac Plus Marine Paint Interlux Toplac Plus Marine Paint delivers professional-grade results for your boat's topside surfaces. This high-gloss, one-part polyurethane finish provides...
Choose Options
Interlux 216 Special Thinner (Quart) - For Brush or Spray Interlux 216 Special Thinner is a fast evaporating solvent which when added to specified paint coatings improves drying in cold climates,...
Add to Cart
Interlux Bilgekote Bilge Enamel Marine Paint Interlux Bilgekote is a fast drying, durable coating formulated for application to bilge areas. This paint helps prevent absorption of oil, gasoline or...
Choose Options
Interlux Micron CF Bottom Paint Antifouling Copper-Free Paint with Econea Micron® CF features all the fantastic benefits of Micron technology-without copper. Micron CF is your multi season...
Choose Options
Interlux 2333N Marine Paint Reducing Solvent Interlux 2333N Reducing Solvent is a slow evaporating solvent to be used in specific two-part polyurethane and epoxy products. Refer to the specific...
Add to Cart
