Interlux Toplac Plus Marine Paint

Interlux Toplac Plus Marine Paint

Interlux Toplac Plus Marine Paint delivers professional-grade results for your boat's topside surfaces. This high-gloss, one-part polyurethane finish provides exceptional durability and UV resistance while offering smooth application characteristics. Perfect for hulls, decks, cabins, and trim above the waterline, this premium paint requires minimal effort to achieve a stunning finish. The advanced formula features excellent flow and leveling properties, eliminating the need for tipping when using a roller. With coverage of 587 square feet per gallon and compatibility with single-part primers, enamels, and polyurethanes, Toplac Plus is both efficient and versatile. The paint can be applied by brush, roller, or spray, typically requiring 2-3 coats for optimal results. Available in various bright, crisp colors, this marine paint maintains its appearance longer while protecting your vessel's surfaces from harsh marine conditions.

Product Features:

• Hard, high gloss, one-part polyurethane finish
• Excellent flow and leveling characteristics
• Smooth Roller Finish with no Tipping required
• Topside paint - Recommended for use above true waterline
• For use with single-part primers, enamels, or polyurethanes
• Available in a range of bright, crisp colors

Specifications:

• Finish: High Gloss
• Application Method: Brush, roller or spray
• Number of Coats: 2 Minimum (only 1 may be needed for touch-up/repair)
• Coverage: 587 sq. ft/gal per coat

Associated Products:

• Thinner/Cleaner
• 2333N Reducing Solvent
• 333 Brushing Thinner
• 216 Special Thinner

How To Apply Toplac Plus

• Application Method:  Brush, Roller, Spray
• Number of Coats: 2-3
• Dry Film Thickness per Coat: 1-1.5 mils (2-3 wet mils)
• Coverage: 587 sq. ft/gal.
• Application Temp: 41°F Min. / 95°F Max.
• Thinning: Add 10% 2333N reducing solvent for brushes and 216 Special Thinner for spray
• Cleaner: 333 Brushing Liquid

Note: Avoid applying late in the evening as condensation can cause a loss of gloss during overnight cure. Do not use in temperatures below 41° F

Surface Preparation & Application

• Previously Painted Surface:
• In poor condition remove all previous coatings and prime the substrate, referring to the primer/undercoat technical datasheet for further preparation instructions.
• In good condition wash down with a suitable detergent, rinse with fresh water and allow to dry
• Abrade with 280 - 320 grit paper and remove sanding residue
• Wipe with Brushing LIquid 333 and allow to dry completely.
• All Substrates:
• Prime with a suitable primer or primer/undercoat

Application Methods:

• Sand the undercoat smooth with 120 - 400 grit wet or dry paper
• Remove dust with a dust wipe
• Apply 2-3 coats of Toplac Plus with 8-16 hours depending on ambient temperature (refer to the table above)
• Ambient temperatures should be between 41° F and 95° F
• Do not exceed 10% thinner by volume

Click here for Interlux Toplac Plus Topside Boat Paint Application Information

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov