Marine Tex Epoxy Putty Repair Kit White

Marine Tex Epoxy Putty Repair Kit - White

Marine-Tex White Epoxy Putty Repair Kit is a professional-grade structural compound that delivers exceptional strength for marine repairs. This versatile putty handles with ease, hardens to incredible durability, and can be sanded smooth like wood. Perfect for fixing fiberglass, aluminum, and wooden boats, it creates permanent bonds between different metals without causing galvanic corrosion. The white formula is specifically designed for fiberglass repairs or anywhere a clean white finish is desired. With impressive specifications including 8,700 PSI compressive strength and 4,000 PSI tensile strength, this waterproof compound excels in both above and below waterline applications. The kit includes everything needed for repairs: epoxy resin, hardener, and mixing stick. Whether you're fixing hull damage, reinstalling loose fasteners, or filling gaps in wood or metal, Marine-Tex creates repairs that are stronger than the original material.

Kit Includes:

• Epoxy Resin
• Hardener
• Mixing Stick

Specifications:.

• Coverage:
• For 2 oz. Kit, 17 square inches at 1/8" thick
• For 14 oz. Kit, 124 square inches at 1/8" thick
• Mixing Ratio: 5 parts epoxy resin to 1 part hardener - by volume. When mixing by weight, the ratio is 6.3 parts resin to 1 part hardener. Always keep epoxy at room temperature before mixing.
• Cure Time: 24 hours at a constant temperature of 72 degrees Fahrenheit. Lower temperatures will create longer cure times.
• Compressive Strength: 8,700 PSI
• Adhesion Shear Strength: 2,300 PSI
• Tensile Strength: 4,000 PSI
• Chemical Resistance: Most common acids, alkalizes and hydrocarbons

Marine-Tex Application Tips:

• Surface preparation is the key to epoxy adhesion. Remove all contaminants (dirt, oil, grease) with acetone or lacquer thinner. Sand area, then remove grit to improve adhesion.
• Mix the proportioned components with a putty stick or hard plastic squeegee on a broad, flat surface-wood, cardboard or plastic.
• Mix only enough for 15 or 20 minutes of nominal working time.
• After components are thoroughly mixed, spread your mixture into a long thin line to ensure a streak-free consistency and to provide you with maximum working time.
• White Marine-Tex can be tinted with Evercoat's coloring agents for fiberglass and wood applications. Use only a small amount of coloring agent (not more than 5% of the total volume of epoxy).

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov