ITW Rapid Set Marine Tex Epoxy Putty 2 oz

ITW Rapid Set Marine Tex Epoxy Putty 2 oz

Handles like putty, hardens like steel, sands like wood. Marine-Tex, the legendary high-strength repair compound designed for filling, bonding and rebuilding wood, fiberglass, ceramic, glass, metal, masonry and many plastics. Marine-Tex is manufactured to the highest standards to meet the harsh demands of the marine and industrial environments, and solve many problems for home, auto and hobby applications.

This Rapid Set Marine-Tex cures in one hour at 72 degrees Fahrenheit. This 1:1 epoxy paste provides a good bond to fill cracks and voids in fiberglass, steel, aluminum, wood, cast iron and many hard plastics. Rapid-Set is formulated for quick mechanical repairs, dockside or at-sea, to get back underway with minimum downtime. Can also be used to secure hardware and loose fasteners.

Directions for Use:

• Mix the two components in equal amounts with a putty stick or hard plastic squeegee on a broad, flat surface. Mix only enough for 5 minutes of nominal working time.
• After components are thoroughly mixed, spread the gray putty into a long thin line to ensure a streak-free consistency and to provide you with maximum working time.
• Near the end of its working time, the mixture will become very warm and it should be discarded.

Frequently Asked Questions

What is ITW Rapid Set Marine Tex Epoxy Putty 2 oz used for?

ITW Rapid Set Marine-Tex Epoxy Putty is a high-strength repair compound for filling, bonding, and rebuilding wood, fiberglass, ceramic, glass, metal, masonry, and many plastics. It can be used for cracks and voids in fiberglass, steel, aluminum, wood, cast iron, and many hard plastics, as well as securing hardware and loose fasteners.

How quickly does ITW Rapid Set Marine-Tex Epoxy Putty cure?

ITW Rapid Set Marine-Tex cures in approximately one hour at 72°F. Its rapid-setting formulation is intended for quick mechanical repairs, including dockside or at-sea repairs where minimizing downtime is important.

What is the mixing ratio for ITW Rapid Set Marine-Tex?

ITW Rapid Set Marine-Tex is a 1:1 epoxy paste. Mix the two components in equal amounts using a putty stick or hard plastic squeegee on a broad, flat surface. Mix only enough material for approximately 5 minutes of nominal working time.

How should ITW Rapid Set Marine-Tex be mixed for a consistent repair compound?

After thoroughly mixing the two components, spread the gray putty into a long, thin line. This helps produce a streak-free consistency while providing maximum working time. Near the end of its working time, the mixture will become very warm and should be discarded.

What materials can ITW Rapid Set Marine-Tex bond or repair?

ITW Rapid Set Marine-Tex provides a good bond for filling cracks and voids in fiberglass, steel, aluminum, wood, cast iron, and many hard plastics. The product is also designed for filling, bonding, and rebuilding ceramic, glass, masonry, and many plastics.

Can ITW Rapid Set Marine-Tex be used to secure hardware and loose fasteners?

Yes. ITW Rapid Set Marine-Tex can be used to secure hardware and loose fasteners. The product is formulated for quick mechanical repairs and can be used for dockside or at-sea repair applications.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov