SeaStar AutoPilot Pump
The SeaStar Autopilot pump is a fixed flow, reversible type set that uses an internal hydraulic gear pump, producing very little vibration or noise. It is offered in 12 and 24 volt configurations, as well as two different pump sizes (type 1 & type 2). It can be used as a stand-alone pilot pump or can be mounted to a previously installed SeaStar Power Assist unit and can prevent the need to break into the hydraulic lines.
Features
| STAND ALONE PILOT PUMP (Can be retro fitted to a SPA unit) | |
| Type 1: 12V–60cu”/min | Part No. AP1219 |
| Type 2: 12V–100cu”/min | Part No. AP1233 |
| Type 1: 24V–60cu”/min | Part No. AP2419 |
| Type 2: 24V–100cu”/min | Part No. AP2433 |
| TECHNICAL | |
| Voltage | 12 or 24 Volts |
| Fittings | Compatible with standard SeaStar Hoses (HO51xx etc.) |
| Oil Compatibility | SeaStar Steering Fluid (MIL 5606) |
| Weight | 4.9 lbs (2.2kg) |
| Autopilot Pump Sizes | Type 1: 60 in3/min (no load) |
| Type 2: 100 in3/min (no load) | |
| Max Pressure | 1000psi |
| Typical Current Draw(Depending on application) | 12 or 24 Volts |
| 12V Type 2: 5 – 11 amps | |
| 24V Type 1: 2 – 4 amps | |
| 24V Type 2: 3 – 6 amps | |
California Residents: 
WARNING
Cancer and Reproductive Harm -
P65Warnings.ca.gov
Other Details
SeaStar Solutions HA5432 Helm Pump Non-Vented Fill Plug SeaStar Solutions replacement Non-Vented Fill Plug. Must be used on all Helm Pumps other than uppermost Helm Pump on multi steering...
Add to Cart
SeaStar HH6191-4 Sport Tilt 1.7 Helm Pump This hydraulic helm pump offers unmatched comfort and control out on the water. This SeaStar helm is one of the world's most popular, offering smooth and...
Add to Cart
SeaStar HP6032 Service Kit for SeaStar Helms Service kit for use with SeaStar Helms. Includes wheel shaft nut, shaft seal, and seal plate. Not for commercial helms.
Add to Cart
