AERIAL PRODUCT CAREWash all racks with a mild soap and water.Polished Product - use Mothers Mag & Aluminum Polish which can be found at any auto parts storePowder Coated Products- no wax, or cleaners can be usedCheck set screws before each useCheck Allen Bolts before each useAerial Wakeboard Racks can be assembled in 4 easy steps...In the first step you need the sides of the racks and the round base. Your going to attach the sides of the racks to the base with 4 screws, 2 for each side of the rack. In the second step you will need your assembled rack from the first step. Next your going to attach the first clamp. This will take 4 screws.Looking from the inside of the rack it should look similar to the pictures below depending on the type of adjustable areial rack.The Third Step you will place the bushing into the first clamp this will keep your rack sturdy and protect your tower.The Fourth step your going to attach the rack to the tower. Place the rack on the tower so the bushing will completely cover the area where the rack will be placed. Then attach the second clamp securely to the first clamp.The information provided here has been reproduced courtesy of Aerial Wakeboard Products. Wholesale Marine reproduced this information 07/14/2009. #DIY #Tower #Watersports
