Electrical & Lighting

Sea Dog Two Position On-Off Push-Pull Switch Sea Dog Two Position Push-Pull Switch constructed of stamped brass. Push-pull switch features positive actuation with two positions On-Off (normally Off).  Stamped Brass Construction Rated 15 amps @...

Attwood Portable LED Boat Stern Light w/ C-Clamp Mount This Portable LED Boat Stern Light w/ C-Clamp Mount features a fully buoyant molded one piece white body design with a removable lamp carriage assembly. Rated at 100,000 hours of LED service...

Blue Sea Systems BusBar 150 Amp - 10 Gang w/ Cover The industry standard busbar for positive distribution The industry standard busbar for the collection of negative or AC ground circuits Specifications: Maximum Voltage: 300V AC 48V DC Number of...

AFI Deluxe Adjustable Stainless Steel Wiper Arm AFI Deluxe Wiper Arms are ideal for use with standard and heavy duty wiper motors. This Deluxe Wiper Arm has a complete stainless steel construction, and features an articulating/bend-back feature. The...

Blue Sea Systems 12 Volt Dash Socket The 12 Volt Dash Socket from Blue Sea Systems is designed to withstand the rigors of wet environments and constant vibration. This dash socket features a watertight cap and large contact surfaces to ensure a good...

AFI Deluxe Pantographic Wiper Arm AFI Deluxe Pantographic Wiper Arms are ideal for use with standard and heavy duty wiper motors. This Pantographic Wiper Arm has a complete stainless steel construction, and features an articulating/bend-back feature...

Primary Wire 16 AWG. 25' roll.

Marinco Shore Power Adapter 15A Boat to 30A Dock The Marinco Shore Power Adapter 15A Boat to 30A Dock is a one piece high quality adapter that is similar in usage to pigtail adapters. Use only in dry enclosed locations, such as powering your boat from a...

Perko Stainless Steel Boat Stern Light w/ Vertical Mount This Perko Boat Stern Light w/ Vertical Mount is composed of stainless steel plating that keeps the electronics safe from harsh marine environments. It uses #8 screws and provides exceptional...

Replacement base for locking collar poles. 2 contact plug-in type base. Black and chrome plated brass. Waterproof snap-on cover, locking collar included to allow use with discontinued base styles. Base dimensions: 2 1/4" O.D.-90 degree angle.

 Perko 250 Amp Battery Selector Switch for 12, 24 or 36 Volt Systems Designed for surface mounting, the Perko Battery Selector Switch has a bright red polycarbonate housing with a large easy-to-turn black knob. The Perko Battery Selector Switch has a...

Sea Dog Thermal Ac-Dc Circuit Breaker Mini thermal AC/DC circuit breakers can replace glass fuse holders in panels. Does not include thermal breaker boot. Use with optional boot #420839-1. Max Panel Depth - 3/16" A=1-3/8" B=7/16" C=1-1/4" D=9/16"

Blue Sea Systems e-Series Single Circuit ON-OFF Switch Features: Ignition protected - safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Meets American Boat and Yacht Council (ABYC) requirements...

Marinco Shore Power Cord Cable Clips Product Features: Includes 6 Cable Clips with stainless steel mounting screws Keeps shore power cable out of the water Holds 10 gauge 30A cable Easy to install Use on deck or edge of dock Organize shore power...

Blue Sea Systems Mini BusBar - 5 Gang 100 Amp w/ Cover The Blue Sea Systems Mini BusBar is great for limited space applications.  Specifications: Maximum Voltage: 300V AC  |  48V DC Number of Screw Terminals: 5 Number of Terminal...

Blue Sea DualBus Plus 150Amp Bus Bar - 5 Gang The Blue Sea DualBus Plus Bus Bar combines negative and positive buses on one block. A clear polycarbonate cover snaps on to meet Coast Guard and ABYC insulation requirements. Maximum Voltage: 300V AC...

Blue Sea Systems MRBF Terminal Fuse Requires the use of Terminal Fuse Blocks PN 5191 or PN 2151 - do not mount the fuses directly to the battery terminal. Interrupt rating satisfies ABYC requirements for DC Main circuit protection on large...

Blue Sea Systems Screw Terminal This Blue Sea Busbar is the industry standard busbar for positive distribution. Base material is reinforced polycarbonate and bus material is tin-plated copper CDA 110/UNS 11000. The industry standard busbar for...

Sea Dog Marine Ignition Switch 3 Position - 3 Terminal - Brass Sea Dog three position stamped brass ignition switch for off, ignition, and start functions. Includes rubber cap. Three screw terminal electrical connection. Action: Off - Ignition -...

Sea Dog Brass On-Off Toggle Switch Sea Dog Brass On-Off Toggle Switch is constructed of stamped brass for excellent corrosion resistance and durability. Rated 15 Amps at 12 Volts DC. Maximum panel thickness of up to 3/8".