7511

Jack Plates

      • T-H Marine Atlas Heavy Duty Hydraulic Jack Plate
        $1,867.59
        $1,623.99

        T-H Marine CMC Atlas Series Heavy Duty Hydraulic Jack Plates: 4", 6", 8", 10", 12" and 14" Heavy-Duty Atlas Hydraulic Jack Plates are rated for engines up to 400 HP. Atlas hydraulic jack plate is designed to meet the demands of today's high performance...

        Choose Options
      • Bob's Machine Hydraulic Pump Assembly
        $559.99
        $453.99

        Bob's Machine Hydraulic Pump Assembly The Bob's Machine Hydraulic Pump Assembly comes complete with solenoids, wiring harness, aluminum backing plate, and two stainless steel 90 degree fittings. The included pump comes with a 3 year manufacturer's...

        Add to Cart
      • Bob's Machine Extreme Gen 3 Action Series Jack Plate
        $2,149.99
        $1,698.99

        Bob's Machine Extreme Gen 3 Action Series Hydraulic Jack Plate 6" Setback Bob's Machine Extreme Gen 3 Jack Plates are designed for 550+ HP engines including V8's. This series of jack plates is wider, allowing for Verado installation without the use of...

        Add to Cart
      • T-H Marine Atlas LED Gauge - Stainless
        $374.31
        $325.49

        T-H Marine Stainless Steel LED Gauge Kit for Atlas Hydraulic Jack Plates All Digital Readout Each Number Indicates 1/4” Rise Numbered from 0 to 20 All Atlas Jacks are Pre-drilled to Fit

        Choose Options
      • T&H Marine  Atlas Series Hot Shot Cover Plates
        $54.04
        $46.99

        T-H Marine Atlas Series Hot Shot Cover Plates Features: Models to Fit All Atlas Jacks Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising

        Choose Options
      • Bob's Machine Kick-Back Jac Plate
        $799.99
        $647.99

        Bob's Machine Kick-Back Jac Plate The Bob's Machine Kick-Back Jac Plate, aka "Stump Jumper" provides a 45 degree tilt up (kick up) for motors up to 115 HP. Delrin rollers and bearings provide a long life of smooth operation and pivoting without the need...

        Add to Cart
      • T-H Marine Z-Lock Series Hot Shot Cover Plate
        $79.34
        $68.99

        T-H Marine Z-Lock Series Hot Shot Cover Plates   These T-H Marine Hot Shot Cover Plates are designed to fit T-H Marine Z-Lock Manual Jack Plates. These Hole Shot Plates provide improved hole shot. Improved hole shot Reduces drag on take...

        Choose Options
      • Bob's Machine Hydraulic Kick-Back Jac Plate
        $1,999.99
        $1,619.99

        Bob's Machine Action Series Hydraulic Kick-Back Jac Plate Bob's Machine Hydraulic Kick-Back Jac Plate allows you to jack up your motor and idle over obstructions, preventing costly damage to the lower unit. This hydraulic kick-back jack plate has 6"...

        Add to Cart
      • T-H Marine Mini-Jacker MJ-1-DP
        $290.99
        $194.99

        T-H Marine Mini-Jacker Features: "Clamp Style" Small Outboard Jack Plate Cast Aluminum Bracket Marine Grade Transom Block 4" Setback -3" Vertical Max Weight- 150lbs; Max 35 HP

        Add to Cart
      • Digital LED Position Gauge for Atlas Hydraulic Jack Plates
        $535.49
        $331.99

        Digital LED Position Gauge for Atlas™ Hydraulic Jack Plates All Digital Readout Numbers Indicate a 1/4" Rise Numbered from 0 to 20 All Atlas™ Jacks are Pre-Drilled to Fit Black Face & Stainless Steel Face Gauges Available

        Choose Options
      • Bob's Machine Reversible 2 Degree Transom Wedge
        $119.99
        $100.99

        Bob's Machine Reversible 2 Degree Transom Wedge Bob's Machine Reversible Transom Wedges provide either a positive or negative trim for your boat. Constructed of cast aluminum, these strong wedges look great and will never crack. This transom wedge...

        Add to Cart
      • T-H Marine Atlas Heavy Duty Hydraulic Jack Plate-Black
        $1,749.14
        $1,520.99

        T-H Marine CMC Atlas Series Heavy Duty Hydraulic Jack Plates - Black: 4", 6", 8", 10", and 12" Heavy-Duty Atlas Hydraulic Jack Plates are rated for engines up to 400 HP. Atlas hydraulic jack plate is designed to meet the demands of today's high...

        Choose Options
      • Bob's Machine Reversible 5 Degree Transom Wedge
        $149.99
        $125.99

        Bob's Machine Reversible 5 Degree Transom Wedge Bob's Machine Reversible Transom Wedges provide either a positive or negative trim for your boat. Constructed of cast aluminum, these strong wedges look great and will never crack. This transom wedge...

        Add to Cart
      • TH Marine CMC Bottom Transom Washer Plate
        $49.99
        $33.49

        CMC Bottom Transom Washer Plate Features: Made from strong 3/8" 6061 T6 Alloy Aluminum. (Not cast Aluminum) Transom washer can eliminate bolts "biting" into transoms and can more evenly distribute loads on high performance engines. Hole Centers: 9-7/8"

        Add to Cart
      • Bob's Machine Jack Plate to Motor Bolt Kit
        $24.99
        $20.99

        Bob's Machine Jack Plate to Motor Bolt Kit The Bob's Machine Jack Plate to Motor Bolt Kit is for use with jack plate installation. This kit is for motors with a standard BIA bolt pattern only and is not for use with the Bob's Machine Mini Manual Jack...

        Add to Cart
      • Bob's Machine Action Jack Plate LED Gauge Kit
        $299.99
        $251.99

        Bob's Machine Action Series Jack Plate LED Gauge Kit Monitor your jack plate's height with the Bob's Machine Action Series LED Gauge Kit. This complete kit can be used with all Bob's Machine Action Series jack plates. Bob's Machine jack plates are...

        Add to Cart
      • Bob's Machine Reversible 10 Degree Transom Wedge
        $219.99
        $184.99

        Bob's Machine Reversible 10 Degree Transom Wedge Bob's Machine Reversible Transom Wedges provide either a positive or negative trim for your boat. Constructed of cast aluminum, these strong wedges look great and will never crack. This transom wedge...

        Add to Cart
      • SeaStar Gen II Xtreme Hydraulic Jack Plate
        $2,351.74
        $2,044.99

        SeaStar Gen II Xtreme Hydraulic Jack Plate The SeaStar Gen II Xtreme Hydraulic Jack Plate is one of the sleekest and most durable jack plates available. The Xtreme Jack Plate allows for higher speeds, gains in fuel economy, and the ability to run in...

        Choose Options

      Optimize Your Boat's Performance With the Right Hydraulic or Manual Jack Plate

      Enhance Your Vessel's Speed, Efficiency, and Handling

      Jack plates are indispensable tools for improving a vessel’s performance, efficiency, and control. For top-quality jack plates, turn to Wholesale Marine.

      We carry a wide selection of jack plates designed to meet the demands of various boating scenarios. Our collection includes manual jack plates and hydraulic options, ensuring a solution for every setup. Explore our range and shop today.

      Understanding How Jack Plates Work

      Jack plates are mechanical devices installed between a boat's transom and its outboard motor. They allow you to adjust the height of the motor depending on water conditions and usage needs, all while keeping it firmly fixed during operation. Unlike trim, which changes the motor's angle, jack plates enable height adjustments. 

      By raising or lowering the motor, you can position the propeller for better performance. This helps reduce drag and increase speed and efficiency. Jack plates are especially useful for boaters who navigate shallow waters or aim to maximize their vessels' performance in open water.

      Why an Outboard Motor Jack Plate Is a Smart Investment

      Jack plates offer a variety of benefits that elevate your boat's performance while helping to protect critical components like the motor and propeller. These include the following:

      • Improved Fuel Efficiency: By reducing drag, jack plates help save fuel, making them an excellent choice for long trips.
      • Enhanced Speed: Adjusting the motor height improves hydrodynamics, which boosts your boat's speed and responsiveness.
      • Shallow Water Navigation: A raised motor reduces the risk of damage to the propeller or motor in shallow water. 
      • Better Handling: Jack plates improve stability and steering for a smoother, more controlled ride.
      • Extended Motor Life: Proper motor height reduces strain on the motor and propeller, potentially prolonging their lifespan and preserving your investment.

      Common Uses of Jack Plates

       Jack plates enhance boat performance across a variety of scenarios, making them a versatile upgrade for different types of vessels:

      • Bass Boats: Jack plates improve shallow water navigation, allowing anglers to easily access fishing spots. They also increase versatility by enabling better positioning in tight or challenging areas.
      • Performance Boats: These boats benefit from jack plates through optimized speed and handling, delivering smoother rides and enhanced overall performance on open water.
      • Recreational Boats: For general boating activities, jack plates help reduce wear on the motor and propeller. They also improve fuel efficiency during extended trips.

      Choose the Right Marine Jack Plate for Your Needs

      At Wholesale Marine, we offer an outboard motor jack plate for different boating styles and requirements. We offer the two main types:

      • Manual Jack Plates: A cost-effective option, these plates use a simple manual mechanism for motor height adjustments. They are ideal for boaters who need occasional adjustments without added complexity.
      • Hydraulic Jack Plates: They provide effortless motor height adjustments with the push of a button, even while underway. Hydraulic options are ideal for those who frequently transition between deep and shallow waters.

      Trusted Brands for Quality and Performance

      At Wholesale Marine, we carry jack plates from industry-leading brands known for their durability and innovation. These include the following: 

      • T-H Marine: Renowned for advanced designs and reliable construction, T-H Marine offers manual jack plates and hydraulic options for various boat types.
      • Bob's Machine Shop: A pioneer in outboard motor jack plate technology, Bob's Machine Shop offers high-quality products for serious boaters.
      • SeaStar Solutions: SeaStar jack plates are engineered for smooth operation and built to easily handle tough conditions.
      • Sierra Marine: A global leader in aftermarket marine parts, Sierra Marine offers a wide selection of high-quality jack plates.

      You Go-To Store for All Your Boating Needs

      Wholesale Marine is dedicated to providing boaters with top-quality tools and equipment to make their time on the water safer and more enjoyable. Whether you're looking for a manual jack plate, a lifebuoy, or a boat fender, you can find what you need in our online store. 

      Here's why we're the top choice for marine equipment and parts:

      • Extensive Selection: From manual jack plates to hydraulic models, we have options for all outboard motors and boats.
      • Trusted Brands: We stock only products from reputable manufacturers to ensure quality and reliability.
      • Competitive Pricing: Our affordable prices make it easy to find the perfect marine jack plate for your vessel. For added payment flexibility, financing is available through Klarna.
      • Captain's Club Rewards: Earn points on every purchase and enjoy members-only perks, like exclusive sales and faster checkout.
      • Expert Support: Our knowledgeable team is here to help you choose the right jack plate for your boat. Free Buyers' Guides are also available on our website.

      Take Your Boating Experience to the Next Level

      Wholesale Marine offers a wide selection of jack plates, including manual jack plates and hydraulic models, all from trusted brands. Whether you need to navigate shallow waters or optimize your speed, our collection has the perfect solution for your boating needs. Shop now and experience the difference a jack plate can make.