Bob's Machine Reversible 10 Degree Transom Wedge

Bob's Machine Reversible 10 Degree Transom Wedge

Bob's Machine Reversible Transom Wedges provide either a positive or negative trim for your boat. Constructed of cast aluminum, these strong wedges look great and will never crack. This transom wedge provides 10 degrees of either negative or positive trim. In most cases, transom wedges are used to provide negative trim for when your bow will not come down enough due to the angle of the motor. Transom wedges are an effective fix. Fits all motors with BIA bolt patterns.

Features:

• 10 Degree transom wedge
• Provides negative or positive trim
• Cast aluminum construction
• Fits all motors with BIA bolt patterns
• Sold as a pair (for 1 engine)

Dimensions: 3" Width x 14" Total Length

Note: For installation, you will need bolts that are 3" longer for "thicker side of wedge" and 0.50" longer for "thin side of wedge".

Frequently Asked Questions

What is the Bob's Machine Reversible 10 Degree Transom Wedge designed to do?

The Bob's Machine Reversible 10 Degree Transom Wedge provides either positive or negative trim for a boat. It can provide negative trim when the bow does not come down far enough because of the motor angle, making the transom wedge an effective way to address that condition.

How much trim does the Bob's Machine Reversible Transom Wedge provide?

The Bob's Machine Reversible Transom Wedge provides 10 degrees of either negative or positive trim. Reversing the wedge allows it to provide the desired trim direction.

What motors does the Bob's Machine Reversible 10 Degree Transom Wedge fit?

The Bob's Machine Reversible 10 Degree Transom Wedge fits all motors with BIA bolt patterns. Verify that your motor uses a BIA bolt pattern before installation.

What is the Bob's Machine Reversible Transom Wedge made from?

The Bob's Machine Reversible Transom Wedge is constructed from cast aluminum. The cast aluminum construction provides a strong wedge designed for use as a positive or negative trim solution.

How is the Bob's Machine Reversible Transom Wedge sold?

The Bob's Machine Reversible Transom Wedge is sold as a pair for one engine. Each wedge measures 3 inches wide by 14 inches in total length.

What bolts are needed to install the Bob's Machine Reversible Transom Wedge?

Installation requires longer bolts because of the wedge thickness. The product description specifies bolts that are 3 inches longer for the thicker side of the wedge and 0.50 inches longer for the thin side.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov