Interlux VC-17M General Thinner - How to Apply

This product has been discontinued

Shop other Interlux Paint products

This information provided here has been reproduced courtesy of Interlux. Wholesale Marine reproduced this information on 3/22/2010.

GENERAL INFORMATION

VC General Thinner is formulated to thin all VC products where necessary and clean application equipment. It will also re-dissolve VC 17m and can be used to remove VC 17m if required.

APPLICATION AND USE

Method When using for surface wipe down, turn the cloth frequently to avoid re-applying residues.

Hints

Ventilation and Humidity Control

Ensure adequate ventilation during use.

Some Important Points

No special restrictions.

Compatibility/Substrates For use with all VC products.

Recommended DFT

TRANSPORTATION,STORAGE AND SAFETY INFORMATION

GENERAL INFORMATION:
Exposure to air and extremes of temperature should be avoided. For the full shelf life of this product to be realised ensure that between use the container is firmly closed and the temperature is between 5 degrees C/40 degrees F and 35 degrees C/95 degrees F. Keep out of direct sunlight.

TRANSPORTATION:
The product should be kept in securely closed containers during transport and storage.

Safety

GENERAL: Read the label safety section for Health and Safety Information, also available from our Technical Help Line.

DISPOSAL: Do not discard tins or pour paint into water courses, use the facilities provided. It is best to allow paints to harden before disposal.

Remainders of VC General Thinner cannot be disposed of through the municipal waste route or dumped without permit. Disposal of remainders must be arranged for in consultation with the authorities.