Categories

Site Information

 Loading... Please wait...
Need Help? Call Toll Free: 877-388-2628
  • Garelick I-O Swim Platform with Telescoping Ladder
  • Size Chart
  • Image 3

Garelick I-O Swim Platform with Telescoping Ladder

SKU:
GAR-19546
Availability:
In Stock - Ships Today
Order within and your order ships today! Details
Current Stock:
10
$233.00
Our Price: $170.09
(You save $62.91)
Quantity:

Product Description

Garelick I-O Swim Platform with Telescope Ladder

  • For use on Inboard/Outboard transoms
  • Stainless steel wrap-around 1" diameter rails
  • Mounts at a 10° angle on transom
  • Durable, high density, white polyethylene platform (18"W X 15-1/2"D X 3/4"H)
  • Rail Height 12-1/2" above and below platform
  • Electropolished stainless steel 2 step ladder
  • Ladder steps telescope down easily
  • Poly comfort steps
  • Stainless steel hardware
  • Length deployed: 22-3/4"
  • Length stowed: 17" Overall height: 5" Width: 13.5"

Mounting Instructions

HOW TO MOUNT GARELICK OUT BOARD I-O SWIM PLATFORM WITH TELESCOPING LADDER

Mounting Instructions:

  • Mount hand rails to platform by inserting 4 bolts through holes in platform. Secure with 4 locknuts.
  • Mount SS strut 22” by inserting bolt through hole and secure with locknut.
  • Mount SS strut 11” by inserting two bolts through holes and secure with 1 locknut.
  • Choose most suitable side of transom for mounting platform. Turn motor unit as far as possible to that side. Make a line on the transom indicating motor unit’s full extension to that side.
  • Position platform away from drawn line at desired mounting location, parallel to the water line, and mark 4 mounting holes through flattened ends of rails and/or struts onto the transom.
  • Drill four marked holes with a bit compatible with selected fasteners (fasteners not provided). Hold drill perpendicular to transom when drilling.
  • If transom is less than 2” thick, it is recommended that a backing plate be mounted on the inside of transom.
    • NOTE: The backing plate should be made of either aluminum, marine plywood or some other suitable non-compressive material.
  • Coat the mounting surfaces of the rails and/or struts with a marine grade adhesive/caulking compound; squeeze a small amount into mounting holes in transom. Insert selected bolts through holes and secure in position with suitable fasteners.

Maintenance:

  • Periodically check mounting hardware and re-tighten (due to normal boat operation).
  • Regular fresh water rinsing and periodic cleaning with a mild abrasive cleaner will help retain luster and help prevent corrosion.

Information sourced from Garelick Assembly Instructions for Platforms Technical Data 

Warranty Information

Limited Lifetime Warranty

Other Details

Google Product Type:
Boat & Dock Ladders
Condition:
NEW

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category

Related Products