Moeller Zinc Phosphate Primers

Moeller Marine Zinc Phosphate Primer

Moeller's Zinc Phosphate Primers are quality-tested to meet the needs of the marine environment. This outboard and stern drive self-etching, phosphate primer chemically bonds with aluminum and steel to form a corrosion-resistant base coat. It exceeds 800 hours of the 5% salt spray corrosion test, and is ideal for spot repair of damaged coatings. Best of all, Moeller’s zinc phosphate primer performs as well as the zinc chromate of old, and makes an excellent—and safe—alternative

Compatible with Moeller Engine Paints

Features:

• Ideal for aluminum surfaces above or below the water line 
• Excellent resistance to the marine environment 
• Outstanding durability and abrasion-resistance 
• Improves bonding of color coat
• Quick-dry formula
• 12 oz. net weight

Superseded to: 025802

How to Apply Moeller Zinc Phosphate Primer

• Surface must be clean, dry, and free of dust before applying.
• For best results, use when can is between 50° F and 90° F.
• Shake can at least one minute after rattle is heard and occasionally during use.
• Spray surface with steady even strokes at a distance of 8 to 10 inches.
• Dries to touch in 20 minutes.
• Can be topcoated in 24 hours.
• Note: dry and topcoat times may vary with curing temperature, humidity, and film thickness.

Frequently Asked Questions

What is Moeller Marine Zinc Phosphate Primer used for?

Moeller Marine Zinc Phosphate Primer is a self-etching phosphate primer designed for outboard and stern drive applications. It chemically bonds with aluminum and steel to create a corrosion-resistant base coat and is especially suited for spot repairs of damaged coatings.

Can Moeller Zinc Phosphate Primer be used on aluminum above and below the waterline?

Yes. Moeller Zinc Phosphate Primer is designed for aluminum surfaces both above and below the waterline. It is formulated for marine environments and provides a base coat that improves bonding of the color coat while offering durability and abrasion resistance.

Is Moeller Zinc Phosphate Primer compatible with Moeller Engine Paints?

Yes. Moeller Zinc Phosphate Primer is compatible with Moeller Engine Paints. The primer is designed to provide a corrosion-resistant base and improve adhesion of the subsequent color coat.

How should Moeller Zinc Phosphate Primer be applied?

Make sure the surface is clean, dry, and free of dust before application. Shake the can for at least one minute after the rattle begins, and shake it occasionally while using it. Spray with steady, even strokes while holding the can approximately 8 to 10 inches from the surface.

What temperature is recommended for applying Moeller Zinc Phosphate Primer?

For best results, use Moeller Zinc Phosphate Primer when the can is between 50°F and 90°F. Drying and topcoat times can vary depending on curing temperature, humidity, and film thickness, so these conditions should be considered during application.

How long does Moeller Zinc Phosphate Primer take to dry before topcoating?

Moeller Zinc Phosphate Primer dries to the touch in approximately 20 minutes and can be topcoated in 24 hours. Actual drying and topcoat times may vary with curing temperature, humidity, and film thickness.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov