Swimways Spring Float Inflate and Deflate

The Spring Float features a patented twist-and-fold storage system and the super-quick Jet Valve for easy inflate and deflate. Whether your getting ready to relax in the pool, or your ready to hit the road, your always less than a minute away!

TO INFLATE

  1. Remove the valve cap located on the back of the float, beneath the head rest pillow. Pull out the valve stem so it is open and fully extended.
  2. Inflate the two air chambers for the pillow and outer ring. Inflate by mouth or hand pump, do not use high pressure air to inflate.
  3. Immediately cover the valve opening with your thumb and press down firmly, closing the valve. Replace the valve cap.

TO DEFLATE AND STORE

  1. Remove the valve cap and pull out the valve stem so it is open and fully extended. Air will automatically be released. Open both air chambers and deflate before folding your Spring Float.
  2. Hold the Spring Float in front of you as shown, palms facing out. Bring your hands together in front of you, forming a shell or taco shape.
  3. Overlap your hands and the float will automatically close into three small circles for storage in the carry bag.

The information provided here has been reproduced courtesy of Swimways. Wholesale Marine reproduced this information 08/05/2009.