Camco Plastic Blow-out Plug

Camco Plastic Blow-out Plug

Completely clear your water lines with the Camco Plastic Blow-out Plug. Use this plug for winterizing to prevent your water lines from freezing. Using a blow-out pump to clear your water lines will help extend the life of your water heater. 

For use with 1" diameter drains. 

Instructions:

• Screw the blow-out plug into the city water inlet
• Open all drains and faucets
• Attach and activate air pump until all lines are clear

Frequently Asked Questions

What is the Camco Plastic Blow-out Plug used for?

The Camco Plastic Blow-out Plug is designed for winterizing water systems by helping clear water from water lines. It is used with a blow-out pump to remove water from the lines and help prevent freezing during cold weather storage.

How do I use the Camco Plastic Blow-out Plug for winterization?

Screw the blow-out plug into the city water inlet, then open all drains and faucets. Attach and activate an air pump until the water lines are clear. This procedure uses compressed air to help remove water from the system before storage.

What size drain is the Camco Plastic Blow-out Plug designed for?

The Camco Plastic Blow-out Plug is specified for use with 1-inch diameter drains. Verify that your application uses the specified drain size before using the plug for winterization.

Can the Camco Plastic Blow-out Plug help prevent frozen water lines?

Yes. The Camco Plastic Blow-out Plug is intended for winterization and helps clear water from the lines. Removing water from the system helps prevent the water lines from freezing during cold-weather storage.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov