Total Price:
Add to CartCE Smith pontoon bolster brackets support bunk boards in a shallow V cradle configuration that best suits pontoon hulls. This V-wing bracket is designed with a 7" lateral adjustment slot for perfect pontoon to trailer alignment. Best when installed with 2x6, 2x8, or 2x10 carpeted bunk boards laid flat.
Features:
A bracket should be installed at each frame cross member for maximum support and load capacity.
What is the CE Smith 26244G Pontoon Wing Bracket used for?
The CE Smith 26244G Pontoon Wing Bracket supports bunk boards in a shallow V cradle configuration designed for pontoon hulls. Its V-wing design helps position carpeted bunk boards for pontoon-to-trailer alignment and is intended for use with 2x6, 2x8, or 2x10 bunk boards installed flat.
What size bunk boards can be used with the CE Smith 26244G Pontoon Wing Bracket?
The CE Smith 26244G Pontoon Wing Bracket is designed for use with 2x6, 2x8, or 2x10 carpeted bunk boards laid flat. Verify your bunk board dimensions and installation requirements before selecting this bracket for your pontoon trailer.
Does the CE Smith 26244G Pontoon Wing Bracket allow lateral adjustment?
Yes. The CE Smith 26244G Pontoon Wing Bracket features a 7-inch lateral adjustment slot. This adjustment range is designed to help align the pontoon with the trailer when positioning the bunk boards.
What is the CE Smith 26244G Pontoon Wing Bracket made from?
The CE Smith 26244G Pontoon Wing Bracket is made from 1/8-inch-thick steel. It has a hot-dipped galvanized finish designed to provide durability for the bracket.
How should CE Smith 26244G Pontoon Wing Brackets be positioned for support?
The product description recommends installing a bracket at each trailer frame cross member for maximum support and load capacity. The brackets support the bunk boards in a shallow V cradle configuration suited to pontoon hulls.
What should I verify before using the CE Smith 26244G Pontoon Wing Bracket?
Verify that your application uses carpeted 2x6, 2x8, or 2x10 bunk boards laid flat and that the bracket's 7-inch lateral adjustment meets your alignment requirements. Also consider the recommended installation at each frame cross member for support and load capacity.
California Residents: 
WARNING
Cancer and Reproductive Harm -
P65Warnings.ca.gov
CE Smith Pontoon Clamp-On Rod Holder The CE Smith Pontoon Clam-On Rod Holder is made for the square rails found on pontoon boats. Each rod holder comes with 2 protective liners, one to fit 1" and...
CE Smith 27672 Pontoon Roller Guide-Ons Bunk trailers are the trailer of choice for transporting pontoon boats. The bunk trailer has a much wider track than the more conventional scissors trailer...
CE Smith Pontoon Boat Trailer Guide-Ons Pontoon boat trailer guide-ons are a helpful tool to make it easier to load your boat onto your trailer and also help with backing the trailer into the water...
CE Smith 27671 Pontoon Bunk Board Guide-Ons Perfect for bunk style pontoon trailers, with either a box, channel, or I-beams up to 3" wide by 4-1/4" tall. Never worry about damaging your boat while...
CE Smith Heavy Duty Vertical Bunk Carpet Bracket Bunk board brackets are designed to help support and attach bunk boards to trailers. They are designed to support the load of the trailer. These CE...
Choose Options