Engine_Fuel & Props

Sea Dog Hose Thru Vent 3" Size: 3-5/8" Square 4" Size: 4-15/16" Square Injection Molded ABS

Attwood Louvered Marine Plastic Venturi Vent Attwood hull-mounted vents are designed to install by fastening as a complete unit from either inside or outside the hull. Ventilation hose (not included) twists into the bottom of the box to form a raised...

Attwood Marine Replacement Cover for P-Trap Vents Available in Black or White.

Stainless midget vent measures 1 5/8" long by 1 3/4" wide. Includes 1/2" opening. Uses #6 round head screws.

Sea Dog Stainless Steel Round Louvered Vent This Sea Dog Stainless Steel Louvered Air Vent is constructed of corrosion-resistant stamped 304 stainless steel. Allows air in while keeping water out. Stainless steel round louvered vent. Measures 5"...

Integral tank vent with flame arrestor. No deck plate key or ground wire required. Black plastic with flip top cap. 2-7/16" neck length, 1-1/2" for fuel hose, 5/8" for vent hose.

Perko Chrome 3" Cowl Vent with Black Plastic Base 3" chrome zinc cowl vent with black plastic base. Uses 3" vent hose. Dimensions: 2 5/8"H x 4 3/8"W x 5 3/4"L.

Chrome plated zinc alloy with black plastic splash guard Removable 30 mesh stainless steel wire screen flame arrestor Hose size 5/8" Maximum hull thickness 3/4"

Perko Chrome Clam Shell Ventilator Perko clam shell ventilators are ideal for many applications, from covering vent holes for battery boxes, water tanks, and fuel tanks to venting engine compartments. Made of chrome plated brass. Each is pre-drilled for...

Flush Vent of injection molded abs.Hole size up to 4". Vent area 4.05 sq.in. Pre-drilled for # 8 F.H. Screw.Overall dimensions 4 15/16" x 4 15/16"

Moeller 035732-10 Chrome Thru-Hull Fuel Tank Vent Thru-Hull Vent for Hulls Up to 1/2" Thick Accommodates 5/8" Vent Hose Vent hose to the fuel tank for thru-hull ventilation Chrome Plated Finish

Gas Tank Vent with 90 degree swivel elbow. Chrome plated zinc alloy cap with zinc alloy elbow. Black plastic splash guard. Removable 30 mesh stainless steel wire screen flame arrestor. Design allows elbow to be rotated to any position. Hose size 5/8"...

Sea Dog Stainless Steel Recessed Louvered Vent This Stainless Recessed Vent can be used in conjunction with Sea-Dog’s Polypropylene Collector Box part number 331202, 331203, 331204. It is designed to allow a flush surface at the vent area reducing...

Attwood Louvered Marine Vent Stainless Steel Attwood hull-mounted vents are designed to install by fastening as a complete unit from either inside or outside the hull. Ventilation hose (not included) twists into the bottom of the box to form a raised...

Perko White/Chrome Gas Tank Vent 5/8" Hose Barb Removable Cap

1" nylon gas tank vent for 5-8" hose. Black PVC.

Sea Dog Stainless Steel Louvered Vent The Sea-Dog Stainless Ventilator part numbers 331290-3 and 331300 can be used in conjunction with the Sea-Dog ABS Collector boxes:331293-331298 for model 331290 and Collector boxes:331303-331304 for model 331300...

Attwood Marine Fuel Tank Vent - Straight Patented splash-resistant, corrosion-resistant polypropylene. Meets ABYC ventilation specifications. All Attwood fuel tank vents meet or exceed U.S. Coast Guard regulations. Hose Size 5/8" ID <

Stainless Steel Locker Ventilator. O.D. Size 2 1/2" Uses #6 Screws

Cast 316 Stainless steel flush thru vent Up to 3" Holes 3-7/8" Overall Dimension 2-7/8" Center to Center mounting holes