Engine_Fuel & Props

Moeller Marine Swingarm Electric Fuel Sending Units These Moeller Swingarm Fuel Sending Units gather fuel level information from a float which is read on a dash-mounted gauge. These units have been pre-inspected to guarantee full range of calibrated...

Choose Options

Moeller Marine Fuel Hose Barb Features: High quality brass hose barbs Male Thread For permanent fuel tanks 1/4" NPT X 1/4" Barb 15 CAL

Choose Options

Moeller 620049LP EPA Compliant 6 Gallon Portable Fuel Tank The Moeller 620049LP is a durable 6-gallon portable fuel tank designed specifically for smaller marine vessels. Built to meet strict EPA and CARB regulations, this tank features...

Add to Cart

Moeller Marine Fuel Pick-Up Tube The Moeller Marine Fuel Pick-Up Tube features below-deck technology with Moeller's above and beyond innovation. 1/4 NPT Aluminum fitting 3/8" I.D. Nylon Tubing/Chemical Resistant OEM replacement Available in...

Choose Options

Moeller Reed Switch Fuel Sending Unit Collect fuel level information more consistently than swingarm senders by taking the measurement from the float-which is still a moving part.  However the fluctuation is much less because the range of motion is...

Choose Options

Moeller Marine 035710 Hold Down Kit for Below Deck Fuel Tanks Permanent Fuel Tank Hold Down Kit Four Brackets per Kit  

Add to Cart

Moeller Marine 5 Hole Gasket for Electric Sending Units Moeller Marine universal 5-hole gasket for electric fuel sending units. Comes complete with 10/24 and 10/32 replacement screws and assorted washers.

Add to Cart

Moeller Marine 12 Gallon Topside Fuel Tank with Low Profile Occasionally marine fuel tanks need replacement after years in the harsh marine environment. This Moeller Marine Topside Fuel Tank has a 12 gallon capacity and a low profile design...

Add to Cart

Moeller Marine 033400-10 Johnson/Evinrude/OMC Fuel Tank Connector 1/4" Moeller Marine replacement male tank connector constructed of high quality brass. Designed for Johnson/Evinrude outboard engines Male engine/tank connector 1/4" NPT thread High...

Add to Cart

Moeller Marine 630012LP EPA Compliant 12 Gallon Portable Fuel Tank Moeller Marine portable fuel tanks are designed and manufactured to deliver uncompromising quality and value. The high profile design and seamless one-piece construction makes this tank...

Add to Cart

Moeller 033481-10 Yamaha Engine or Tank Fuel Line Connector 3/8"  Moeller Marine female engine/tank connector that attaches to the fuel hose on the tank side of the engine side. 3/8" Barb Female Fuel Line Engine and Tank Connector Compatible...

Add to Cart

Moeller 035723 Permanent Fuel Tank Installation Kit Includes the following: Deck fill and gasket (2) 1-1/8" and (4) 2-1/4" stainless steel hose clamps One 12" fuel fill hose 25" of 5/8" vent hose 5/8" brass hose barb 2 Mounting strips Chrome...

Add to Cart

Moeller 033319-10 In-Line Fuel Filter Kit Kit Includes: Universal inline glass view fuel filter  3/8", 5/16", & 1/4" barbs Features: Moeller's In-line Disposable fuel filters trap dirt and other metallic particles. The design...

Add to Cart

Moeller Marine Mercury (1998 & Newer) Fuel Tank Connector 1/4" NPT Moeller Marine Mercury fuel tank fitting designed for engines manufactured 1998 and after. 1/4" NPT Thread Threads into fuel withdraw on tank Use with Moeller part #...

Add to Cart

Moeller Marine Clip Engine Connector for Mercury Engines Attaches to fuel hose on the engine side. 3/8" Barb Female Clip Style For use with Moeller tank fitting part  #moe-033477-10 For use on Mercury Engines 1998 and Newer.  1997...

Add to Cart

Moeller Marine Johnson/Evinrude/OMC  Engine/Tank Fuel Line Connector 3/8" Moeller Marine female engine/tank connector that attaches to the fuel hose on the tank side of the engine side. 5/16" Barb Female Fuel Line Engine and Tank...

Add to Cart

Moeller 034395-10LPA Universal 5/16" Fuel Line Assembly  Assemblies use a compounded, tough & pliable UV-resistant 5/16" I.D.hose. Hose is 80" long. Can be used to customize your fuel line assembly to match the existing connector on your...

Add to Cart

Moeller Marine Fuel Tank Mounting Strips Use for Below Deck Mounting Self-Adhesive Strips for Cushioning between the Tank and the Hull Provide Room for Circulation Can be used with Topside Tanks Sold in Pairs Description: 2" W X 30" L X 1/4"...

Add to Cart

Moeller Marine 033801-10 Aluminum Anti-Siphon Barb Anti-siphon valves, are required by Federal Law and the USCG on all permanent fuel tank installations. 30 Calibration for HP below 200 HP. Yields 30" vertical height protection. Deliver Coat...

Add to Cart

Moeller 035732-10 Chrome Thru-Hull Fuel Tank Vent Thru-Hull Vent for Hulls Up to 1/2" Thick Accommodates 5/8" Vent Hose Vent hose to the fuel tank for thru-hull ventilation Chrome Plated Finish

Add to Cart