Garelick I-O Swim Platform with Telescoping Ladder

Shop All Garelick

SKU:
GAR-19546
$432.99
$324.99

Low Price Guaranteed

Availability:
In Stock - Ships Today
Order within :

Free Shipping over $99

Frequently Bought Together
  • Garelick I-O Swim Platform with Telescoping Ladder
  • Total Price:

    Add to Cart

Garelick I-O Swim Platform with Telescope Ladder

Features:

  • For use on Inboard/Outboard transoms
  • Stainless steel wrap-around 1" diameter rails
  • Mounts at a 10° angle on transom
  • Durable, high density, white polyethylene platform (18"W X 15-1/2"D X 3/4"H)
  • Rail Height 12-1/2" above and below platform
  • Electropolished stainless steel 2 step ladder
  • Ladder steps telescope down easily
  • Poly comfort steps
  • Stainless steel hardware
  • Length deployed: 22-3/4"
  • Length stowed: 17" Overall height: 5" Width: 13.5"

Mounting Instructions:

  • Mount hand rails to platform by inserting 4 bolts through holes in platform. Secure with 4 locknuts.
  • Mount SS strut 22” by inserting bolt through hole and secure with locknut.
  • Mount SS strut 11” by inserting two bolts through holes and secure with 1 locknut.
  • Choose most suitable side of transom for mounting platform. Turn motor unit as far as possible to that side. Make a line on the transom indicating motor unit’s full extension to that side.
  • Position platform away from drawn line at desired mounting location, parallel to the water line, and mark 4 mounting holes through flattened ends of rails and/or struts onto the transom.
  • Drill four marked holes with a bit compatible with selected fasteners (fasteners not provided). Hold drill perpendicular to transom when drilling.
  • If transom is less than 2” thick, it is recommended that a backing plate be mounted on the inside of transom.
    • NOTE: The backing plate should be made of either aluminum, marine plywood or some other suitable non-compressive material.
  • Coat the mounting surfaces of the rails and/or struts with a marine grade adhesive/caulking compound; squeeze a small amount into mounting holes in transom. Insert selected bolts through holes and secure in position with suitable fasteners.

Maintenance:

  • Periodically check mounting hardware and re-tighten (due to normal boat operation).
  • Regular fresh water rinsing and periodic cleaning with a mild abrasive cleaner will help retain luster and help prevent corrosion.

Information sourced from Garelick Assembly Instructions for Platforms Technical Data 

pdficon.pngInstallation Instructions

pdficon.pngRetaining Strap Installation Instructions

Frequently Asked Questions

What is the Garelick I-O Swim Platform with Telescope Ladder designed for?

The Garelick I-O Swim Platform with Telescope Ladder is designed for use on inboard/outboard transoms. It includes a durable white polyethylene platform, stainless steel wrap-around rails, and a two-step electropolished stainless steel ladder that telescopes down for use.

What are the dimensions of the Garelick I-O Swim Platform?

The white polyethylene platform measures 18" wide by 15-1/2" deep by 3/4" high. The platform mounts at a 10° angle on the transom, and the stainless steel rails extend 12-1/2" above and below the platform.

How does the telescope ladder on the Garelick I-O Swim Platform work?

The stainless steel two-step ladder telescopes down easily when needed. Its deployed length is 22-3/4", while its stowed length is 17". The ladder also features poly comfort steps.

What hardware is included with the Garelick I-O Swim Platform?

The swim platform includes stainless steel hardware for assembling the platform, rails, and struts. Fasteners for mounting the completed platform to the transom are not provided and must be selected to suit the installation.

How should the Garelick I-O Swim Platform be mounted to an inboard/outboard transom?

Position the platform at the desired location, parallel to the water line, and mark the four transom mounting holes. Drill the holes perpendicular to the transom, then use marine-grade adhesive or caulking on the mounting surfaces and holes before securing the platform with suitable fasteners. If the transom is less than 2" thick, a suitable non-compressive backing plate is recommended.

How should the Garelick I-O Swim Platform be maintained?

Periodically check the mounting hardware and re-tighten it as needed due to normal boat operation. Regularly rinse the platform and hardware with fresh water, and periodically clean them with a mild abrasive cleaner to help retain their luster and help prevent corrosion.

California Residents: warning sign WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov

Warranty Information

Limited Lifetime Warranty

Garelick I-O Swim Platform with Telescoping Ladder Specs

Product MPN
19546
Product UPC
038203195469
Fast Ship
In Stock Ships Today

Related Products for Garelick I-O Swim Platform with Telescoping Ladder

Garelick I-O Swim Platform with Telescoping Ladder Reviews


Garelick I-O Swim Platform with Telescoping Ladder Questions & Answers