Hawk Epoxy F4 Bridging Adhesive Filler

Hawk Epoxy F4 Bridging Adhesive Filler

The Sea Hawk Hawk Epoxy F4 Bridging Adhesive Filler is an easy to use adhesive designed to work with the Hawk Epoxy System. This easy to use adhesive has excellent gap filling and filleting qualities. The mixture blends with many different types of wood to allow for a natural looking fillet or gap fill.

Sea Hawk Hawk Epoxy F4 Bridging Adhesive Filler compares to West System 406 Filleting Blend

Features:

• Thickens to a brown color
• Ideal for gap filling and filleting
• Blends with many types of wood for a natural looking fillet or gap fill

Directions For Use:

1. Mix the Hawk Epoxy resin and catalyst
2. Mix the filler thoroughly. Then blend in small amounts of filler to the mixed resin and catalyst until the desired thickness is achieved

• Depending on use, mixing more or less filler will allow multiple uses with the same filler. For Example:
• If you desire a zero-sag effect mix to a very thick consistency. This can act as a filler for uneven surfaces without worry of sag
• For laminating flat panels or bonding large surfaces, filler should be mixed to a pourable or injectable consistency
• To ensure maximum adhesion strength, use only enough filler to avoid sagging or running. When using a resin/catalyst/filler mixture for bonding, a small amount of mixture should squeeze out from between the two items that are being bonded to each other when they are pushed together.
• For general bonding, filleting, or bonding hardware, mix material to a slightly to moderately thick consistency.

Click here to download Hawk Epoxy Application guide

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov