
Interlux 601 Fiberglass Surface Prep Interlux Fiberglass Surface Prep is a mold release agent and wax remover, which precludes the need for sanding bare fiberglass when used with Fiberglass No Sand...
Choose OptionsTotal Price:
Add to Cart202 Fiberglass Solvent Wash is a combination of several solvents, some of which are very slow to evaporate from the surface of gel coat being wiped. This characteristic is very important because the wax contaminants must stay in solution so that it can be wiped from the surface before it dries. 202 Solvent wash is also an excellent parts clean up and multi-purpose wipe down solvent.
Use before painting bare fiberglass gel coats. This solvent removes mold release agents, wax, oil, and grease. Leaves a properly cleaned surface for optimal paint adhesion. 202 Solvent is also used for cleaning painting tools.
***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***
APPLICATION: Wipe a small area with a clean rag that has been wetted with Fiberglass Solvent Wash 202. While the surface is still wet, wipe with a clean, dry rag. Continue this process until the entire surface has been cleaned. Rinse with fresh water. If water beads up or separates, wipe the surface again with Fiberglass Solvent Wash. When the water sheets off, all contamination has been removed. Do not paint until surface is clean and dry.
Not for sale or use in California.
California Residents:
WARNING
Cancer and Reproductive Harm -
P65Warnings.ca.gov
Other Details