Interlux Toplac Plus Marine Paint

Interlux Toplac Plus Marine Paint

Interlux Toplac Plus delivers a hard, high-gloss polyurethane finish designed for topside applications above the waterline. This one-part marine paint features superior flow and leveling characteristics that produce smooth roller finishes without tipping. Apply it to hulls, decks, cabins, and trim using brush, roller, or spray methods. With coverage of 587 square feet per gallon, you'll need 2-3 coats for optimal protection. The formula works with single-part primers, enamels, and polyurethanes while offering excellent UV resistance. Available in bright, crisp colors that maintain their appearance in harsh marine environments.

Product Features:

• Hard, high gloss, one-part polyurethane finish
• Excellent flow and leveling characteristics
• Smooth Roller Finish with no Tipping required
• Topside paint - Recommended for use above true waterline
• For use with single-part primers, enamels, or polyurethanes
• Available in a range of bright, crisp colors

Specifications:

• Finish: High Gloss
• Application Method: Brush, roller or spray
• Number of Coats: 2 Minimum (only 1 may be needed for touch-up/repair)
• Coverage: 587 sq. ft/gal per coat

Associated Products:

• Thinner/Cleaner
• 2333N Reducing Solvent
• 333 Brushing Thinner
• 216 Special Thinner

How To Apply Toplac Plus

• Application Method:  Brush, Roller, Spray
• Number of Coats: 2-3
• Dry Film Thickness per Coat: 1-1.5 mils (2-3 wet mils)
• Coverage: 587 sq. ft/gal.
• Application Temp: 41°F Min. / 95°F Max.
• Thinning: Add 10% 2333N reducing solvent for brushes and 216 Special Thinner for spray
• Cleaner: 333 Brushing Liquid

Note: Avoid applying late in the evening as condensation can cause a loss of gloss during overnight cure. Do not use in temperatures below 41° F

Surface Preparation & Application

• Previously Painted Surface:
• In poor condition remove all previous coatings and prime the substrate, referring to the primer/undercoat technical datasheet for further preparation instructions.
• In good condition wash down with a suitable detergent, rinse with fresh water and allow to dry
• Abrade with 280 - 320 grit paper and remove sanding residue
• Wipe with Brushing LIquid 333 and allow to dry completely.
• All Substrates:
• Prime with a suitable primer or primer/undercoat

Application Methods:

• Sand the undercoat smooth with 120 - 400 grit wet or dry paper
• Remove dust with a dust wipe
• Apply 2-3 coats of Toplac Plus with 8-16 hours depending on ambient temperature (refer to the table above)
• Ambient temperatures should be between 41° F and 95° F
• Do not exceed 10% thinner by volume

Click here for Interlux Toplac Plus Topside Boat Paint Application Information

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov