Johnson Evinrude OMC Engine Tuner

Johnson Evinrude OMC Engine Tuner

Keep your Johnson Evinrude outboard running at peak performance with OMC Engine Tuner. This effective treatment removes harmful carbon deposits, gum, and varnish from rings, pistons, valves, and ports. Simply spray through the air intake of your 2 or 4-cycle engine for better power and efficiency. Regular maintenance every 50 hours or annually helps maintain optimal engine function. Works great on marine engines, power tools, and snowmobiles too.

Features:

• 13 oz. Spray Can
• Removes deposits
• Cleans combustion chambers
• Not to be mixed with oil

Instructions:

• Remove propeller.
• Run motor to normal operating temperature - Never Run Motor Without Cooling Water.
• Set motor at fast idle (about 1200 RPM).
• Spray can contents into carburetor throat(s).
• Do not let motor stall until can is empty.
• When can is empty, turn off motor and let soak for 3 to 16 hours.
• Restart motor and run at fast idle (1500 RPM) for at least 15 minutes.

Frequently Asked Questions

What is Johnson Evinrude OMC Engine Tuner used for?

Johnson Evinrude OMC Engine Tuner is designed to remove carbon deposits, gum, and varnish from engine components including rings, pistons, valves, and ports. It also cleans combustion chambers and is specified for 2-cycle and 4-cycle engines.

How do I use Johnson Evinrude OMC Engine Tuner?

Remove the propeller and run the motor to normal operating temperature with cooling water. Set the motor to fast idle at about 1200 RPM and spray the can contents into the carburetor throat(s). Do not allow the motor to stall until the can is empty.

How long should Johnson Evinrude OMC Engine Tuner soak in the engine?

After the can is empty, turn off the motor and allow the treatment to soak for 3 to 16 hours. Then restart the motor and run it at fast idle, approximately 1500 RPM, for at least 15 minutes.

Can Johnson Evinrude OMC Engine Tuner be used on 2-cycle and 4-cycle engines?

Yes. Johnson Evinrude OMC Engine Tuner is specified for use with both 2-cycle and 4-cycle engines. The product description also identifies applications on marine engines, power tools, and snowmobiles.

How often should Johnson Evinrude OMC Engine Tuner be used?

The product description recommends regular maintenance every 50 hours or annually to help maintain engine function. Follow the supplied application instructions when using the treatment.

What safety precaution is important when using Johnson Evinrude OMC Engine Tuner?

The motor must never be run without cooling water. The instructions also specify removing the propeller before treatment, running the motor at the stated operating speeds, and not allowing the motor to stall while spraying the can contents.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov