Lewmar Ocean 10 Hatch 12-3/4" x 12-3/4"

Lewmar Ocean 10 Hatch 12-3/4" x 12-3/4"

The Lewmar Ocean series hatch features a classic style that is fitted to countless boats around the world. The rugged construction provides a tight seal to keep the elements out. This boat hatch is constructed with an anodized aluminum frame for excellent corrosion resistance in marine environments. Whether for ventilation or to cool off, the hatch friction levers can hold the lid open in any position up to 95°. Lewmar's Ocean hatch is suitable for CE area 2, including decks, coachroofs, cockpits, and transoms.

Product Feature:

• Smoke Gray Acrylic
• Anodized Aluminum Frame
• Suitable for CE Area 2
• Friction Levers

Ocean Series - Flat Base

NOTE: Flat base hatches cannot be used with Trim kits or Roller shades

Specifications:

• Length: 12-3/4"
• Width: 12-3/4"
• Height: 1-9/16"
• Radii: 2-15/16"
• Hinge Length: 3/16"
• Hinge Width: 5-7/16"
• Cut-Out Length: 10-1/16"
• Cut-Out Width: 10-1/16"
• Cur-Out-Radii - 1-9/16"

Ocean Series - Flange Base

Specifications:

• Lower Frame: 1" Flange
• Length: 12-3/4"
• Width: 12-3/4"
• Height: 1-9/16"
• Radii: 2-15/16"
• Hinge Length: 3/16"
• Hinge Width: 5-7/16"
• Cut-Out Length: 10-1/4"
• Cut-Out Width: 10-1/4"
• Cut-Out Radii: 1-11/16"

Mounting Instructions:

• Fit to a flat surface with a maximum tolerance of +/- 1mm
• Fastening size at hinge section use M6 / 1/4"
• Lower frame fastening size 5mm CSK No. 10 UNC 2 BA

Click here for Lewmar Ocean Series Hatch Fitting & Adjustment Instructions

Frequently Asked Questions

What is the Lewmar Ocean 10 Hatch 12-3/4" x 12-3/4" designed for?

The Lewmar Ocean 10 Hatch 12-3/4" x 12-3/4" is a boat hatch suitable for CE Area 2 applications, including decks, coachroofs, cockpits, and transoms. It features a smoke gray acrylic lens, anodized aluminum frame, and friction levers that hold the lid open in any position up to 95°.

What are the dimensions of the Lewmar Ocean 10 Hatch?

The Lewmar Ocean 10 Hatch measures 12-3/4" long by 12-3/4" wide and 1-9/16" high. The hatch has a 2-15/16" radius and a hinge measuring 3/16" by 5-7/16".

What are the cut-out dimensions for the Lewmar Ocean 10 Hatch?

The required cut-out depends on the base style. The flat base version has a 10-1/16" x 10-1/16" cut-out with a 1-9/16" cut-out radius. The flange base version has a 10-1/4" x 10-1/4" cut-out with a 1-11/16" cut-out radius.

What is the difference between the flat base and flange base versions?

The flat base version has a flat lower frame, while the flange base version has a 1" lower frame flange. Both versions have the same 12-3/4" x 12-3/4" overall dimensions and 1-9/16" height, but their cut-out dimensions differ.

Can the Lewmar Ocean 10 Hatch be used with trim kits or roller shades?

No. The supplied product information specifically states that flat base hatches cannot be used with trim kits or roller shades. Verify the base style and installation requirements before selecting accessories.

What are the mounting requirements for the Lewmar Ocean 10 Hatch?

The hatch should be fitted to a flat surface with a maximum tolerance of +/- 1mm. The hinge section uses M6 / 1/4" fasteners, while the lower frame uses 5mm CSK No. 10 UNC 2 BA fasteners.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov