Marinco Connect Pro 3-Wire Receptacle

Marinco Connect Pro 3-Wire Receptacle

Connect Pro system has superior electric current carrying capacity that eliminates problems that rob motors of power and reduce battery life. The ConnectPro system features locking plug and receptacle and spring clamping connection, which provides a secure electrical contact.

Marinco's Connect Pro 3-Wire Receptacle has a universal design for 2 or 3-wire configuration 12V, 24V, 12/24V, 24/36V or 36V systems. This receptacle is designed to be easy to install, and easily replaces other trolling motor plugs and receptacles. Mounting plate is supplied with receptacle. 

Features:

• Universal design for 2 or 2-wire configuration, 12V, 24V, 12/24V, 24/36V or 36V systems.
• Watertight sealing cap.
• Corrosion resistant, plated brass electrical components.
• Drain holes in receptacle keep water away from electrical components.
• Perma-Lock screw terminals will not loosen under extreme hull vibration.
• Standard 1-1/8" diameter mounting hole.
• Easy to install, with supplied mounting plate for front panel installation, or locking ring for rear access installation
• Accepts 10 and 8 AWG wire
• Easily replaces other trolling motor plugs and receptacles. 

Frequently Asked Questions

What is the Marinco Connect Pro 3-Wire Receptacle used for?

The Marinco Connect Pro 3-Wire Receptacle provides a secure electrical connection for compatible 2- or 3-wire trolling motor systems. It has a universal design for 12V, 24V, 12/24V, 24/36V, or 36V systems and is designed to replace other trolling motor plugs and receptacles.

What voltage systems does the Marinco Connect Pro 3-Wire Receptacle support?

The Marinco Connect Pro 3-Wire Receptacle supports 12V, 24V, 12/24V, 24/36V, or 36V systems in 2- or 3-wire configurations. It accepts 10 and 8 AWG wire.

Is the Marinco Connect Pro 3-Wire Receptacle weather resistant?

Yes. The receptacle features a watertight sealing cap and drain holes designed to keep water away from electrical components. It also uses corrosion-resistant, plated brass electrical components.

What type of mounting hole does the Marinco Connect Pro 3-Wire Receptacle require?

The Marinco Connect Pro 3-Wire Receptacle fits a standard 1-1/8-inch diameter mounting hole. A mounting plate is supplied for front-panel installation, while a locking ring can be used for rear-access installation.

What type of terminals does the Marinco Connect Pro 3-Wire Receptacle use?

The receptacle uses Perma-Lock screw terminals designed not to loosen under extreme hull vibration. The electrical components are corrosion-resistant, plated brass, and the receptacle accepts 10 and 8 AWG wire.

Does the Marinco Connect Pro 3-Wire Receptacle include mounting hardware?

Yes. The receptacle is supplied with a mounting plate for front-panel installation. A locking ring is also specified for rear-access installation, providing two installation options for the receptacle.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov