Electrical & Lighting

Marinco 30 Amp Male Shore Power Plug Product Features: Male plug 30 Amp/125V Marine grade construction Stainless steel fasteners.

Add to Cart

Blue Sea Black DC Label Set 60 labels The Blue Sea Black DC Label Set contains 60 common DC labels. These labels are made with a reinforced, waterproof material.  Uses: On all Contura Waterproof Circuit Breaker Panels On Contura Waterproof...

Add to Cart

Attwood Stainless Steel LED Boat Side Light This Attwood Stainless Steel LED Boat Side Light uses LED technology, making it more efficient than standard incandescent bulbs. It keeps the light cooler and draws less power making it a top choice among...

Choose Options

Replace lanyard if worn, cut or frayed. Dual circuitry allows kill switch to be wired for either ignition kill or magneto kill depending on the application.

Add to Cart

Sea Dog LED Stainless Steel Day - Night 12 Volt Dome Light Sea Dog LED Day/Night Dome Lights have very low current consumption at .068 amps at 12 volts and have an extremely long life. These lights give off very low heat and are resistant to vibration...

Add to Cart

Sea Dog Battery Terminal Covers Comes with both red and black.

Add to Cart

Blue Sea ST Blade Fuse Block w/ Negative Bus and Cover-6 Circuit This Blue Sea Fuse Block consolidates branch circuits and in-line fuses. The Blue Sea ST Blade Fuse Block offers a space saving and cost effective solution to adding circuit protection...

Add to Cart

Attwood Portable LED Boat Stern Light w/ C-Clamp Mount This Portable LED Boat Stern Light w/ C-Clamp Mount features a fully buoyant molded one piece white body design with a removable lamp carriage assembly. Rated at 100,000 hours of LED service...

Add to Cart

Sea Dog Two Position On-Off Push-Pull Switch Sea Dog Two Position Push-Pull Switch constructed of stamped brass. Push-pull switch features positive actuation with two positions On-Off (normally Off).  Stamped Brass Construction Rated 15 amps @...

Add to Cart

Blue Sea Systems 12 Volt Dash Socket The 12 Volt Dash Socket from Blue Sea Systems is designed to withstand the rigors of wet environments and constant vibration. This dash socket features a watertight cap and large contact surfaces to ensure a good...

Choose Options

Blue Sea Systems BusBar 150 Amp - 10 Gang w/ Cover The industry standard busbar for positive distribution The industry standard busbar for the collection of negative or AC ground circuits Specifications: Maximum Voltage: 300V AC 48V DC Number of...

Add to Cart

 Perko 250 Amp Battery Selector Switch for 12, 24 or 36 Volt Systems Designed for surface mounting, the Perko Battery Selector Switch has a bright red polycarbonate housing with a large easy-to-turn black knob. The Perko Battery Selector Switch has a...

Add to Cart

Marinco Shore Power Adapter 15A Boat to 30A Dock The Marinco Shore Power Adapter 15A Boat to 30A Dock is a one piece high quality adapter that is similar in usage to pigtail adapters. Use only in dry enclosed locations, such as powering your boat from a...

Add to Cart

Marinco Shore Power Cord Cable Clips Product Features: Includes 6 Cable Clips with stainless steel mounting screws Keeps shore power cable out of the water Holds 10 gauge 30A cable Easy to install Use on deck or edge of dock Organize shore power...

Add to Cart

Sea Dog Thermal Ac-Dc Circuit Breaker Mini thermal AC/DC circuit breakers can replace glass fuse holders in panels. Does not include thermal breaker boot. Use with optional boot #420839-1. Max Panel Depth - 3/16" A=1-3/8" B=7/16" C=1-1/4" D=9/16"

Choose Options

Blue Sea Systems e-Series Single Circuit ON-OFF Switch Features: Ignition protected - safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Meets American Boat and Yacht Council (ABYC) requirements...

Add to Cart

Blue Sea Systems Mini BusBar - 5 Gang 100 Amp w/ Cover The Blue Sea Systems Mini BusBar is great for limited space applications.  Specifications: Maximum Voltage: 300V AC  |  48V DC Number of Screw Terminals: 5 Number of Terminal...

Add to Cart

Sea Dog Marine Ignition Switch 3 Position - 3 Terminal - Brass Sea Dog three position stamped brass ignition switch for off, ignition, and start functions. Includes rubber cap. Three screw terminal electrical connection. Action: Off - Ignition -...

Add to Cart

Blue Sea Systems MRBF Terminal Fuse Requires the use of Terminal Fuse Blocks PN 5191 or PN 2151 - do not mount the fuses directly to the battery terminal. Interrupt rating satisfies ABYC requirements for DC Main circuit protection on large...

Choose Options

Sea Dog Brass On-Off Toggle Switch Sea Dog Brass On-Off Toggle Switch is constructed of stamped brass for excellent corrosion resistance and durability. Rated 15 Amps at 12 Volts DC. Maximum panel thickness of up to 3/8".

Add to Cart