Megaware FlexStep Pro Adjustable Trailer Step

Megaware FlexStep Pro Adjustable Trailer Step

The Megaware FlexStep Pro is an innovative multi-angle, extendable step system that attaches to your trailer frame. This convenient step makes boating easier by allowing easy access to virtually anywhere on your boat. A quick, spring loaded pull handle and locking pin system adjusts the Megaware FlexStep Pro to 16 positions for maximum reach. Additionally, the FlexStep Pro can extend from 17 to 21 inches for those harder to reach areas. The Megaware FlexStep Pro fits most trailer rails and mounts in minutes using only four bolts. The FlexStep Pro easily disconnects with a single pin for safe storage during travel. This adjustable step is manufactured from lightweight, high tensile 6063-T6 anodized aluminum, ensuring the highest quality. The FlexStep Pro is designed to safely hold up to 300 lbs.

Features:

• 16 Adjustable positions
• Extends from 17 to 21 inches
• Removable for safe travel and stowing
• Fits most trailer rails (2-3" x up to 4" wide)
• Anodized aluminum construction

How to Install a Megaware FlexStep Pro

The Megaware FlexStep Pro comes with included hardware designed for mounting to any boat trailer with frames up to 3" deep. If your trailer frame is larger, you will need to purchase longer bolts separately.

• Place the base mount on the trailer frame in the location of your choice.
• Take the four bolts and place them through the mounting plate and align with trailer frame.
• Protective sleeves are provided to sheath the bolts to prevent trailer scratches.
• Place the backing plate on the back or rear side of the trailer frame and align the four bolts through the corresponding holes.
• Apply a washer over the end of the bolt and attach the nylon lock nut.
• Secure evenly with firm pressure. Do not over tighten.

 Click to Download Megaware FlexStep Pro Installation Instructions

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov