Mercury 802878-30 Force & Tracker 1997-Older Graphite Gray Engine Paint

Mercury 80287830 Graphite Gray Enamel Spray Paint - 12 oz

The Mercury 80287830 Graphite Gray Enamel Spray Paint is a genuine Mercury touch-up paint designed for Force and Tracker outboards with dark gray cowling. This factory-match paint is intended for 1997 and older Force and Tracker outboards where Graphite Gray is the correct original finish.

Packaged in a convenient 12-ounce spray can, this Mercury enamel spray paint is ideal for touching up scratches, chips, and worn paint areas on compatible outboard components. It provides a high-gloss finish, dries quickly, and is produced to Mercury Marine original equipment specifications.

Product Features:

• Genuine Mercury Graphite Gray enamel spray paint
• Factory match for Force and Tracker outboards with dark gray cowling
• Designed for 1997 and older Force and Tracker outboards where specified
• Great for touching up scratches, chips, and worn paint areas
• Convenient 12-ounce spray can
• High-gloss enamel finish
• Fast-drying formula for marine touch-up work
• Produced to Mercury Marine OEM specifications

Product Details:

• Brand: Mercury
• Manufacturer Part Number: 80287830
• Part Type: Enamel Spray Paint
• Color: Graphite Gray
• Size: 12 oz spray can
• Application: Force and Tracker outboards with dark gray cowling, 1997 and older

Recommended Application Notes:

• Use when air and can temperature are between 50°F and 80°F.
• For best results, apply when humidity is 60% or less.
• Avoid spraying in windy or dusty conditions.
• Cover surrounding areas to protect from overspray.
• Prepare the surface by priming with Mercury Light Gray Primer, where required.
• Wipe the surface with a tack cloth to remove sanding particles and dust.
• Shake the can well for one minute after the mixing ball begins to rattle, and shake often during use.
• Hold the can upright 8-10 inches from the surface and apply thin, even coats.
• Apply a second coat within 1 hour or after 24 hours.
• Apply Mercury Clear Coat 30 minutes after the base color has been applied, where required.

Dry Time:

• Dry to Touch: Approximately 20 minutes
• Full Cure: Approximately 24 hours

Service Note: See your owner’s manual or service manual for specific paint application recommendations, surface preparation, primer requirements, clear coat requirements, and refinishing instructions for your Force or Tracker outboard.

Fitment Note: Paint color match should be verified by outboard brand, model year, cowling color, original finish, parts diagram, or existing paint code before ordering. Please confirm Graphite Gray is the correct color for your Force or Tracker outboard before purchasing.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov