Mercury Gen II 2003-Present Xtreme CCX189 Control Cables 4000 Series

SeaStar Mercury Gen II 2003-Present Xtreme CCX189 Control Cables 4000 Series by Dometic

This SeaStar control cable is designed for use with Mercury Gen II steering systems from 2003 to the present and is a replacement for the OEM 4000 series.  Ridges on the core allow a close fit with the cable's inner liner, but minimum contact, so the core glides back and forth smoothly like a skater on ice. The result is a control cable with easy movement AND minimum lost motion.

Direct replacement for Teleflex Marine CCX189 series original factory control cables. SeaStar Solutions replaced Teleflex Marine and has been acquired by Dometic Group.

Application:

• Mariner, Mercury, Mercruiser and other engines using Mercury 2003-Date 4000 series controls.
• Replaces Mercury Gen II type cables

Features:

• Drop-in replacement cables are engineered as replacements for original equipment cables.
• Cables use the existing connection components.
• Stainless steel and brass fittings.
• Made in the USA
• 4" minimum bend radius.
• Black HDPE outer casing for durability and best resistance to UV an chemicals.

Frequently Asked Questions

What is the SeaStar Mercury Gen II 2003-Present Xtreme CCX189 Control Cable used for?

The SeaStar Mercury Gen II 2003-Present Xtreme CCX189 Control Cable is designed as a replacement for Mercury 4000 series OEM control cables used with Mercury Gen II controls from 2003 to the present. It is also listed for Mariner, Mercury, Mercruiser, and other engines using Mercury 2003-date 4000 series controls.

What engines and controls are compatible with the SeaStar CCX189 control cable?

The CCX189 is designed for Mercury Gen II control systems from 2003 to the present and replaces Mercury Gen II type cables. The application also lists Mariner, Mercury, Mercruiser, and other engines using Mercury 2003-date 4000 series controls.

Can the SeaStar CCX189 be used as a replacement for an OEM control cable?

Yes. The SeaStar CCX189 is engineered as a drop-in replacement for original equipment 4000 series cables and uses the existing connection components. It is also described as a direct replacement for Teleflex Marine CCX189 series original factory control cables.

How does the SeaStar Xtreme CCX189 provide smooth cable movement?

The cable uses ridges on its core that provide a close fit with the inner liner while maintaining minimal contact. This allows the core to glide smoothly back and forth while minimizing lost motion for easier control movement.

What are the construction features of the SeaStar CCX189 control cable?

The SeaStar CCX189 features stainless steel and brass fittings with a black HDPE outer casing. The casing is designed for durability and resistance to UV exposure and chemicals. The cable also has a 4-inch minimum bend radius and is made in the USA.

What bend radius is required for the SeaStar Mercury Gen II CCX189 control cable?

The SeaStar CCX189 has a 4-inch minimum bend radius. When routing the control cable, the installation should account for this specified minimum radius to maintain the cable's intended application and movement characteristics.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov