Mercury 881126K01 Mercruiser V8 High Performance Oil Filter

Mercury-MerCruiser 35-881126K01 High Efficiency Oil Filter

The Mercury-MerCruiser 35-881126K01 High Efficiency Oil Filter is a genuine OEM replacement filter for select MerCruiser Hi-Performance V8 engines made by General Motors. This screw-on oil filter is designed to provide efficient, effective oil filtration while helping protect vital engine components from damaging contaminants.

Featuring an anti-drain back valve, this filter helps maintain start-up lubrication and reduce dry starts. The filter also features a metal shell that is 50% thicker than conventional filters, along with a durable corrosion-resistant finish for demanding marine environments.

Product Features:

• Genuine Mercury-MerCruiser high efficiency oil filter
• Screw-on oil filter for select MerCruiser Hi-Performance GM V8 engines
• Designed for efficient, effective oil filtration
• Anti-drain back valve helps ensure start-up lubrication
• Helps eliminate dry starts after the engine has been sitting
• 50% thicker metal shell than conventional filters
• Durable, corrosion-resistant finish
• Easy to replace with common tools and an oil filter wrench

Product Details:

• Brand: Mercury-MerCruiser
• Manufacturer Part Number: 35-881126K01
• OEM Part Number: 881126K01
• Part Type: High Efficiency Oil Filter
• Filter Style: Screw-on
• Application: Select MerCruiser Hi-Performance GM V8 engines

Fits:

• 2007 and newer MCM Hi-Performance GM V8 engines where specified

Does Not Fit:

• SCi 600, 662, and 700 engines with serial numbers 0M953905 through 0M962240
• All SCi 850 models
• All SCi 1075 models
• All SCi 1200 models

Interchange:

• Sierra 18-7876
• Mallory 9-57811
• Mallory 9-57803

General Installation Steps:

• Unscrew the old oil filter and clean the mounting base.
• Make sure the old gasket is removed from the mounting base.
• Apply a thin coat of oil to the new filter gasket.
• Make sure the gasket is seated properly in the base of the filter.
• Screw the filter on until the gasket contacts the base.
• Tighten 1 to 1-1/4 turns. Do not exceed 1 to 1-1/4 turns.
• Use an acceptable oil filter wrench if necessary.
• Refill the crankcase, run the engine, and check for leaks.
• Check the oil level after running the engine.

Maintenance Note: Change your oil and filter at least once each year, or as recommended by your owner’s manual based on hours of use and operating conditions.

Fitment Note: Oil filter fitment should be verified by engine model, horsepower, serial number, Hi-Performance/SCi application, parts diagram, or existing filter part number before ordering. Please confirm this filter is correct for your MerCruiser Hi-Performance V8 engine before purchasing.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov