Total Price:
Add to CartPettit 121 Spraying Thinner
Pettit 121 Spraying Thinner is a general purpose thinner for thinning spray enamels for easier application. Many paints when stored for some time before use will increase in viscosity and should be thinned with a good thinner for normal spray application. The thinner flashes out rapidly and allows an applicator to apply a light tack coat followed by a double spray coat.
Recommended Use: Thin the paint about 10% to 20% and mix thoroughly. For better calculation of the proper spray viscosity, the reduced paint can be checked with a viscosity cup. Enamels should be thinned to about 20 to 25 seconds viscosity in a #2 Zahn cup.
**Can Be Shipped Ground Only in the 48 Contiguous States.**
California Residents: 
WARNING
Cancer and Reproductive Harm -
P65Warnings.ca.gov
Other Details
Pettit 120 Brushing Thinner Pettit 120 Brushing Thinner is a general purpose thinner for thinning brushing enamels for easier application. Many paints when stored for some time before use will...
Add to Cart
Pettit Transducer Antifouling Spray Paint - 6 oz Pettit's Transducer Paint is for use only on plastic transducer housings and bare metals including steel, stainless steel, cast iron, copper, bronze,...
Add to Cart
Pettit Epoxy Marine Thinner Pettit 97 Epoxy Thinner is a strong, fairly fast evaporating thinner that allows two-part epoxies to flow out smoothly and yet flashes out fast enough to prevent sags...
Add to Cart
Pettit EZ Bilge Performance Bilge Paint Pettit's EZ Bilge is a durable high-performance alkyd finish specially formulated to withstand the abuses associated with boat bilges. The hardwearing finish...
Choose Options
Interlux 333Q Marine Brushing Thinner Interlux Brushing Thinner is a slow drying solvent to ease brushing and facilitate the flow of specified paint coatings. Slow Drying Solvent Used to...
Add to Cart
Pettit EZ Cabin Coat - Quart Pettit's EZ Cabin-Coat is a high performance, water-based paint specially formulated for areas that are prone to moisture. Its durable finish easily withstands the...
Choose Options
