Pettit Trinidad 75 Hard Antifouling Bottom Paint

Pettit Trinidad 75 Hard Antifouling Bottom Paint

Pettit Trinidad 75 Bottom Paint is an extremely effective hard antifouling paint for professional applicators. Trinidad 75 utilizes an extremely high load of cuprous oxide to combat even the most extreme fouling conditions. Its durable, hard modified epoxy finish has excellent adhesion and is highly abrasion resistant. Trinidad 75 utilizes fast dry technology so you can paint and launch in the same day. When left in the water, Trinidad 75 will provide years of dependable service.

 Pettit Trinidad 75 provides excellent antifouling protection and is backed by the industry's strongest limited warranty. Pettit's Hull Defense 18 Month Limited Warranty offers peace of mind to every boater. Trinidad 75 offers the most dependable and trusted antifouling protection in the industry.

Features:

• Proven track record of unparalleled performance
• Designed for extreme fouling conditions with a high copper load
• Left In the water, Trinidad 75 provides classic, year-round service
• Fast dry technology = paint and launch same day

Specifications:

• Pack Size: 1 US Gallon
• Finish: Flat
• Recommended Usage: All fouling waters
• Colors Available: 1074FD Blue, 1079FD Special Black
• Number of Coats Recommended: 2 minimum per season
• Coverage: 4450 ft2/gal
• VOC: 329 grams/liter
• Biocide: Cuprous Oxide 60.9%

Associated Products:

Pettit Protect Epoxy Primer - Primer for bare fiberglass applications

Pettit 92 Bio-Blue Hull Surface Prep - For bare fiberglass applications

How Much Pettit Trinidad 75 Do I Need for My Boat?

Refer to the chart below to calculate how much Trinidad 75 paint you will need for your boat.

1. Calculate the square footage of the hull to be painted - multiply the length of the hull by the beam then multiply that total by .85
2. Divide that number (your square foot total) by the amount of coverage Trinidad 75 provides. (450 square foot per gallon). This will give you a one-coat total.

Example: If your boat has a length of 28', and a beam of 8.5', you will multiply 28 x 8.5 x .85 to get your total square footage. The total square footage for this boat is 202.3 square feet. A gallon of Trinidad 75 has a coverage of 450 square feet per gallon for one coat, so one gallon will be enough for two coats.

How to Apply Pettit Trinidad 75 Bottom Paint

Pettit Trinidad 75 Paint is easily applied by brush, roller, or spray. When rolling, use only a high-quality short nap (maximum 3/8" nap) roller cover. Over-application will virtually assure inadequate coating performance. Mix paint thoroughly to ensure ingredients are evenly dispersed throughout the can. Follow all surface preparation instructions to ensure proper coating performance. Trinidad 75 should not be applied to aluminum hulls or outdrives.

Trinidad 75 is heavily loaded with cuprous oxide; as a result, settling can occur. It is necessary to thoroughly mix the paint before using. If possible, shake the can of paint on a mechanical paint shaker.

• Application Methods: Brush, roller, airless or conventional spray
• Number of Coats: 2 minimum per season
• Dry Film Thickness: 2 mils (3.6 wet mils)
• Coverage: 450 sq. ft/gal.
• Application Temp: 40°F Min. / 90°F Max.
• Thinner: 120 Brushing Thinner (Max 10%)

Application Systems

• Previously Painted Surfaces
• Trinidad 75 can be applied over most aged hard antifouling coatings.
• If previous paint is in good condition, sand painted surface with 80 grit sandpaper.
• Solvent clean with 120 Brushing Thinner to remove residue.
• Apply two finish coats of Trinidad 75.
• If previous coating is soft or in poor condition, remove to the bare surface by sanding or using paint remover.
• Proceed with appropriate bare system.
• Bare Fiberglass
• All bare fiberglass, regardless of age, should be thoroughly cleaned with 92 Bio-Blue Hull Surface Prep or dewaxed several times with D-95 Dewaxer. Then proceed with one of the systems below:
• Sanding Method:
• Sand hull thoroughly with 80 grit sandpaper to a dull, frosty finish and rewash with 120 Brushing Thinner.
• Apply two coats of Trinidad 75.
• Non-Sanding Method:
• Thoroughly clean, dewax surface with 92 Bio-Blue Surface Prep using a course nylon scuff pad.
• Rinse all residue from surface and let dry.
• Apply one coat of Pettit Protect Epoxy Primer 4700/4701 following primer label instructions.
• Apply two or three coats of Trinidad 75.
• Barrier Coat
• Prepare the fiberglass surface as mentioned above (sanding method).
• Apply two to three coats of Pettit Protect Epoxy Primer per label instructions.
• Apply two or three coats of Trinidad 75.
• Bare Wood
• Sand thoroughly with 80 grit sandpaper and wipe clean.
• Apply a coat of Trinidad 75 thinned 25% with Pettit 120 Brushing Thinner.
• Allow an overnight dry then lightly sand and wipe clean.
• Apply two finish coats of Trinidad 75.
• Steel Hulls
• Clean surface to remove grease and dirt.
• Remove loose rust and scale from the metal surface by scraping or sandblasting.
• Blow off residue then apply one or two coats of Pettit 6980 Rustlok Primer.
• Follow with two coats of Pettit 4700/4701 Epoxy Primer.
• Apply two or three finish coats of Trinidad 75.

Do not use Pettit Trinidad 75 on aluminum hulls and outdrives.

Click to Download Pettit Trinidad 75 Bottom Paint Application Instructions

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov