Quicksilver 92-802878Q-1 Phantom Black Spray Paint

Quicksilver 802878Q1 Phantom Black Gloss Enamel Spray Paint for Mercury And MerCruiser Engines

Phantom Black is an authentic black paint for Mercury and Mariner Outboards, Sport Jet, and Mercruiser Stern Drives. This aerosol paint is easy to apply and features a fast-drying and high-gloss formula. Use Mercruiser Black Paint with Quicksilver Light Gray Primer for better adhesion.

• Fast-drying
• High-gloss

How to Apply Mercruiser Phantom Black Paint

Use when air and can temperature is between 50°F and 80°F and humidity is 60% or less. Avoid spraying in very windy or dusty conditions. Cover the surrounding area to protect from spray mist.

• Prepare surface by priming with Quicksilver Light Gray Primer
• Wipe the surface lightly with tack cloth to remove sanding particles and dust.
• Shake Mercruiser Black Paint vigorously for one minute after the mixing ball begins to rattle. Shake often during use.
• Hold Mercruiser Black Paint can upright 8-10 inches away from the surface and apply thin, even coats using a steady, uniform, back and forth motion. Keep the can in motion while spraying.
• Release button after each stroke.
• Dries to the touch in 20 minutes, to handle in 1 hour, and fully dry in 24 hours.
• Apply a second coat of Mercruiser Phantom Black Paint within one hour or after 24 hours otherwise the paint might wrinkle or lift.
• Apply Mercury Clear Coat 30 minutes after base color has been applied

Frequently Asked Questions

What is Quicksilver 802878Q1 Phantom Black Gloss Enamel Spray Paint used for?

Quicksilver 802878Q1 Phantom Black Gloss Enamel Spray Paint is an authentic black aerosol paint for Mercury and Mariner outboards, Sport Jet, and MerCruiser stern drives. Its fast-drying, high-gloss formula is designed for easy application and provides a gloss black finish for compatible engine surfaces.

How should Quicksilver Phantom Black Paint be applied?

Prime the surface with Quicksilver Light Gray Primer, then remove sanding particles and dust with a tack cloth. Shake the can vigorously for one minute after the mixing ball begins to rattle. Hold the can upright 8-10 inches from the surface and apply thin, even coats using a steady back-and-forth motion.

What temperature and humidity conditions are recommended for applying Quicksilver Phantom Black Paint?

For best results, use Quicksilver Phantom Black Paint when the air and can temperature are between 50°F and 80°F and humidity is 60% or less. Avoid spraying in very windy or dusty conditions, and cover surrounding areas to protect them from spray mist.

How long does Quicksilver Phantom Black Paint take to dry?

Quicksilver Phantom Black Paint dries to the touch in approximately 20 minutes, is ready to handle in approximately 1 hour, and is fully dry in approximately 24 hours. A second coat should be applied within 1 hour or after 24 hours to help prevent the paint from wrinkling or lifting.

Can a clear coat be applied over Quicksilver Phantom Black Paint?

Yes. Mercury Clear Coat can be applied approximately 30 minutes after the Phantom Black base color has been applied. Follow the specified application timing to apply the clear coat over the base color.

Why should Quicksilver Light Gray Primer be used with Phantom Black Paint?

Quicksilver Light Gray Primer is recommended as the primer for Quicksilver Phantom Black Paint to provide better adhesion. Prepare the surface with the primer before applying the Phantom Black enamel, then wipe away sanding particles and dust with a tack cloth before spraying.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov