Quicksilver 92-858080Q03 Power Tune

Quicksilver 92-858080Q03 Power Tune Internal Engine Cleaner

Quicksilver Power Tune is used to remove performance-robbing carbon build-up from the combustion chamber. This engine cleaner can be used in all 2- and 4-cycle carbureted and fuel-injected gasoline engines. Power Tune works to restore lost power due to carbon, gum, and varnish deposits that accumulate in the combustion chambers of gasoline engines. These deposits are the result of normal engine use, low temperature operation, and the use of some fuels. Removing these deposits helps improve fuel/air flow and overall engine performance. This product is safe for catalyzed engines.

Features:

• 12 oz Aerosol
• Removes carbon build-up, gum, and varnish
• For use in all 2- and 4-cycle gasoline engines
• Safe for catalyzed engines

How to Use Quicksilver Power Tune

• Run engine until warm then remove the air filter.
• Securely insert plastic tube into spray head nozzle.
• Increase engine speed to 200-300 RPM above idle.
• Slowly spray Power Tune directly into the carburetor intake so it goes into the engine.
• Note: If engine stalls, restart it and continue spraying Power Tune into the engine.
• In cases of extreme deposit buildup, spark plug fouling may occur. Remove, clean, and replace spark plugs as necessary.
• When the can is almost empty, spray heavily until engine stalls.
• Replace air filter.
• Allow Power Tune to soak inside the engine for 15-30 minutes.
• Start engine and rev slightly. You may notice a lot of smoke.
• Note: Smoking is normal, your engine is burning off the cleaner and deposits in your engine's combustion chamber.
• Continue revving your engine for 4 - 5 minutes or until smoking stops.

Frequently Asked Questions

What is Quicksilver 92-858080Q03 Power Tune Internal Engine Cleaner used for?

Quicksilver 92-858080Q03 Power Tune Internal Engine Cleaner is designed to remove carbon buildup, gum, and varnish deposits from the combustion chambers of gasoline engines. Removing these deposits can help restore power lost from buildup and improve fuel/air flow and overall engine performance.

What engines can Quicksilver Power Tune be used in?

Quicksilver Power Tune is designed for use in all 2- and 4-cycle carbureted and fuel-injected gasoline engines. The product is also stated to be safe for catalyzed engines.

How do I use Quicksilver Power Tune Internal Engine Cleaner?

Warm the engine, remove the air filter, and securely insert the plastic tube into the spray nozzle. Increase engine speed 200–300 RPM above idle and slowly spray Power Tune into the carburetor intake. After spraying, allow the cleaner to soak for 15–30 minutes, then restart the engine and rev slightly.

What should I expect after applying Quicksilver Power Tune?

After the cleaner has soaked inside the engine, start the engine and rev it slightly. A lot of smoke may be produced as the engine burns off the cleaner and deposits from the combustion chamber. Continue revving the engine for 4–5 minutes or until the smoking stops.

What should I do if the engine stalls while spraying Quicksilver Power Tune?

If the engine stalls while Power Tune is being sprayed into the carburetor intake, restart the engine and continue spraying the cleaner. In cases of extreme deposit buildup, spark plug fouling may occur; remove, clean, and replace the spark plugs as necessary.

What size is Quicksilver 92-858080Q03 Power Tune?

Quicksilver 92-858080Q03 Power Tune Internal Engine Cleaner is supplied in a 12 oz aerosol can and is formulated to remove carbon buildup, gum, and varnish from gasoline engine combustion chambers.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov