Quicksilver OEM MerCruiser Bellows Adhesive 86166Q1

Quicksilver OEM MerCruiser Bellows Adhesive 86166Q1

Quicksilver Bellows adhesive 86166A1 is for use on all MerCruiser sterndrive universal and exhaust bellows. Follow instructions on the package for best results. See your owner's manual or service manual for specific application and instructions.

Applications: For all MCM sterndrives.

• For use on all MerCruiser sterndrives to securely seal universal and exhaust bellows
• Resistant to oil, grease, gasoline and water
• See your owner's manual or service manual for specific applications and instructions

This adhesive is used to securely seal the universal and exhaust bellows on a MerCruiser drive.

Adhesive Instructions:

• It is important to properly prepare the surface by removing all loose dust, dirt, oil, grease, wax, etc
• For best results the temperature should be 65° or higher during application
• Brush or flow an even thin coat to both surface. Allow the adhesive to dry until tacky then join the surfaces with firm pressure
• It can take up to 15 minutes for a 10 mil wet film on the two surfaces to bond.

Interchange:

• Sierra
• 18-9031-1

Frequently Asked Questions

What is Quicksilver OEM MerCruiser Bellows Adhesive 86166Q1 used for?

Quicksilver OEM MerCruiser Bellows Adhesive 86166Q1 is designed for use on all MerCruiser sterndrives to securely seal universal and exhaust bellows. Follow the package instructions and consult the applicable owner's or service manual for specific applications and installation instructions.

Is Quicksilver 86166Q1 Bellows Adhesive compatible with all MerCruiser sterndrives?

Yes. The product description states that this adhesive is for all MCM sterndrives and is intended for universal and exhaust bellows. Consult your owner's or service manual for the specific application and installation requirements for your MerCruiser drive.

What is Quicksilver MerCruiser Bellows Adhesive resistant to?

Quicksilver Bellows Adhesive 86166Q1 is resistant to oil, grease, gasoline, and water. It is used to securely seal universal and exhaust bellows on a MerCruiser drive.

How do you apply Quicksilver 86166Q1 Bellows Adhesive?

Prepare the surfaces by removing loose dust, dirt, oil, grease, wax, and other contaminants. Apply an even, thin coat to both surfaces and allow the adhesive to dry until tacky. Join the surfaces using firm pressure. For best results, the application temperature should be 65°F or higher.

How long does Quicksilver Bellows Adhesive take to bond?

The product description states that a 10 mil wet film on the two surfaces can take up to 15 minutes to bond. Allow the adhesive to become tacky before joining the prepared surfaces with firm pressure.

What product is Quicksilver 86166Q1 Bellows Adhesive interchangeable with?

Quicksilver 86166Q1 Bellows Adhesive is listed as interchangeable with Sierra 18-9031-1. Verify the specific application requirements in your owner's or service manual before using an interchangeable product.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov