Rule In-Line Bilge Blower For 3" Ducting

Rule In-Line Bilge Blower For 3" Ducting

The Rule In-Line Bilge Blowers are designed for efficient, high output operation. Each Rule In-Line Bilge Blower features their exclusive front and rear shaft seals and corrosion resistant motor housings for long life. Although these bilge blowers are compact, they provide higher air flow, lower amp draw, and quieter operation than standard blowers. Easily installed on any flat surface.

• Efficient high-volume air flow
• Quiet operation
• Low amp draw
• Slip-on inlet and outlet ducting connections
• Sealed motor shaft for moisture protection
• Corrosion resistant nickel-plated motor housing
• IMCI (CE)
• USCG 183.410 Compliant, Ignition protected

Specifications:

• Flow rate: 135 CFM @ Open Flow
• Voltage: 13.6 Vdc
• Fuse Size: 4 Amp
• Amp Draw: 2.9 Amp
• Port Type: 3" Ducting
• Dimensions: 2.9" x 5" x 3.2"

Replaces:

• Jabsco ITT-30480-0000

Click to Download Rule In-Line Bilge Blower Data Sheet

Frequently Asked Questions

What is the Rule In-Line Bilge Blower for 3" Ducting used for?

The Rule In-Line Bilge Blower for 3" Ducting is designed for efficient, high-volume airflow in marine ventilation applications. Its compact design provides high airflow with low amp draw and quiet operation. The blower can be installed on any flat surface and uses slip-on connections for 3-inch ducting.

How much airflow does the Rule In-Line Bilge Blower produce?

The Rule In-Line Bilge Blower has a flow rate of 135 CFM at open flow. It operates at 13.6 Vdc and has a 2.9-amp draw. The specified fuse size is 4 amps, and the blower is designed for use with 3-inch ducting.

What size ducting does the Rule In-Line Bilge Blower use?

The Rule In-Line Bilge Blower uses 3-inch ducting with slip-on inlet and outlet connections. Verify that your existing or planned ventilation system uses compatible 3-inch ducting before installation.

Is the Rule In-Line Bilge Blower ignition protected?

Yes. The Rule In-Line Bilge Blower is ignition protected and is listed as USCG 183.410 compliant. It also carries IMCI (CE) compliance. The blower features a sealed motor shaft for moisture protection and a corrosion-resistant nickel-plated motor housing.

What are the dimensions and electrical specifications of the Rule In-Line Bilge Blower?

The blower measures 2.9 inches by 5 inches by 3.2 inches. It operates at 13.6 Vdc with a 2.9-amp draw and uses a 4-amp fuse. Its compact dimensions make it suitable for installations where the available space accommodates the specified measurements.

What does the Rule In-Line Bilge Blower replace?

The Rule In-Line Bilge Blower for 3" Ducting is specified as a replacement for the Jabsco ITT-30480-0000. Verify the existing blower's ducting, dimensions, and electrical requirements before selecting a replacement.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov